FAA-2026-19083

Document Headings Document headings vary by document type but may contain the following: • the agency or agencies that issued and signed a document • the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to • the agency docket number / agency internal file number • the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Transportation Federal Aviation Administration • 14 CFR Part 39 • [Docket No. FAA-2026-1329; Project Identifier AD-2025-01626-T; Amendment 39-23463; AD 2026-18-08] • RIN 2120-AA64 ( printed page 58807) AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule. SUMMARY: The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 767-300F series airplanes. This AD was prompted by a report of a supplier notice of escapement documenting that some titanium cargo track crown fittings had suspect material certifications. This AD requires an X-ray fluorescence (XRF) spectrometer inspection to identify the material composition of the cargo track crown fittings or replacement of all cargo track crown fittings with new cargo track crown fittings, and applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products. DATES: This AD is effective October 22, 2026. The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of October 22, 2026. ADDRESSES: AD Docket: You may examine the AD docket at regulations.gov under Docket No. FAA-2026-1329; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, any comments received, and other information. The address for Docket Operations is U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590. Material Incorporated by Reference: • For Boeing material identified in this AD, contact Boeing Commercial Airplanes, Attention: Contractual & Data Services (C&DS), 2600 Westminster Blvd., MC 110-SK57, Seal Beach, CA 90740-5600; telephone 562-797-1717; websitemyboeingfleet.com. • You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195. It is also available atregulations.gov under Docket No. FAA-2026-1329. FOR FURTHER INFORMATION CONTACT: Taylor Stanley, Aviation Safety Engineer, FAA, 2200 South 216th St., Des Moines, WA 98198; phone: 407-852-7677; email: taylor.stanley@faa.gov. SUPPLEMENTARY INFORMATION: Background The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain The Boeing Company Model 767-300F series airplanes. The NPRM was published in the Federal Register on February 17, 2026 (91 FR 7180). The NPRM was prompted by a report of a supplier notice of escapement documenting that some titanium cargo track crown fittings had suspect material certifications. The supplier did not have correct material records to make sure that type design specified material was used. In the NPRM, the FAA proposed to require an XRF spectrometer inspection to identify the material composition of the cargo track crown fittings or replacement of all cargo track crown fittings with new cargo track crown fittings, and applicable on-condition actions. The FAA is …

Fonte: Federal Register (federalregister.gov). Texto original em inglês. Conteúdo sanitizado por segurança.