FAA-2026-18752

Document Headings Document headings vary by document type but may contain the following: • the agency or agencies that issued and signed a document • the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to • the agency docket number / agency internal file number • the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Transportation Federal Aviation Administration • 14 CFR Part 39 • [Docket No. FAA-2026-8803; Project Identifier AD-2026-00385-E] AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed rulemaking (NPRM). SUMMARY: The FAA proposes to adopt a new airworthiness directive (AD) for certain CFM International, S.A. (CFM) Model CFM56-5B, CFM56-5C, and CFM56-7B engines with a certain high-pressure turbine (HPT) inner stationary seal installed. This proposed AD was prompted by multiple reports of honeycomb separation from the surface of HPT inner stationary seals. This proposed AD would require initial and repetitive borescope inspections (BSIs) of the rotating air HPT front seal for cracks and, depending on the results, replacement with a part eligible for installation. This proposed AD would also require removal and replacement of the affected HPT inner stationary seal. This proposed AD would also require inspection of the affected HPT inner stationary seal for honeycomb separation and, depending on the results of the inspection, removal and replacement of the rotating air HPT front seal, HPT rotor blades, and No. 3 ball bearing. The FAA is proposing this AD to address the unsafe condition on these products. DATES: The FAA must receive comments on this proposed AD by October 29, 2026. ADDRESSES: You may send comments, using the procedures found in 14 CFR 11.43 and 11.45, by any of the following methods: • Federal eRulemaking Portal: Go to regulations.gov. Follow the instructions for submitting comments. • Fax: (202) 493-2251. • Mail: U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590. • Hand Delivery: Deliver to Mail address above between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. AD Docket: You may examine the AD docket at regulations.gov under Docket No. FAA-2026-8803; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this NPRM, any comments received, and other information. The street address for Docket Operations is listed above. Material Incorporated by Reference: • For CFM service material identified in this proposed AD, contact CFM GE Aviation Fleet Support, 1 Neumann Way, M/D Room 285, Cincinnati, OH 45125; phone: (877) 432-3272; email:aviation.fleetsupport@ge.com. • You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 1200 District Avenue, Burlington, MA 01803. For information on the availability of this material at the FAA, call (817) 222-5110. FOR FURTHER INFORMATION CONTACT: Alexei Marqueen, Aviation Safety Engineer, FAA, 2200 South 216th Street, Des Moines, WA 98198; phone: (781) 238-7178; email: alexei.t.marqueen@faa.gov. SUPPLEMENTARY INFORMATION: Comments Invited The FAA invites you to send any written relevant data, views, or argumen…

Fonte: Federal Register (federalregister.gov). Texto original em inglês. Conteúdo sanitizado por segurança.