FAA-2026-10270

Document Headings Document headings vary by document type but may contain the following: • the agency or agencies that issued and signed a document • the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to • the agency docket number / agency internal file number • the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Transportation Federal Aviation Administration • 14 CFR Part 39 • [Docket No. FAA-2026-1340; Project Identifier MCAI-2024-00430-T; Amendment 39-23341; AD 2026-10-01] • RIN 2120-AA64 ( printed page 30199) AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule. SUMMARY: The FAA is adopting a new airworthiness directive (AD) for certain Embraer S.A. Model ERJ 190-100 ECJ airplanes. This AD was prompted by a manufacturing quality escape concerning certain overheat detection system (ODS) sensing elements. This AD requires a detailed inspection of certain ODS sensing elements of the airplane bleed lines and replacement, if necessary. This AD also prohibits the installation of affected parts. The FAA is issuing this AD to address the unsafe condition on these products. DATES: This AD is effective June 26, 2026. The Director of the Federal Register approved the incorporation by reference of certain publication listed in this AD as of June 26, 2026. ADDRESSES: AD Docket: You may examine the AD docket at regulations.gov under Docket No. FAA-2026-1340; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, the mandatory continuing airworthiness information (MCAI), any comments received, and other information. The address for Docket Operations is U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590. Material Incorporated by Reference: • For Agência Nacional de Aviação Civil (ANAC) material identified in this AD, contact ANAC, Aeronautical Products Certification Branch (GGCP), Rua Dr. Orlando Feirabend Filho, 230—Centro Empresarial Aquarius—Torre B—Andares 14 a 18, Parque Residencial Aquarius, CEP 12.246-190—São José dos Campos—SP, Brazil; telephone 55 (12) 3203-6600; emailpac@anac.gov.br. You may find this material on the ANAC website at sistemas.anac.gov.br/certificacao/DA/DAE.asp. • You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195. It is also available atregulations.gov under Docket No. FAA-2026-1340. FOR FURTHER INFORMATION CONTACT: Nicole Tsang, Aviation Safety Engineer, FAA, 2200 South 216th St., Des Moines, WA 98198; phone: 206-231-3959; email: Nicole.S.Tsang@faa.gov. SUPPLEMENTARY INFORMATION: Background The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain Embraer S.A. Model ERJ 190-100 ECJ airplanes. The NPRM was published in the Federal Register on February 25, 2026 (91 FR 9193). The NPRM was prompted by AD 2024-07-01, effective July 31, 2024 (ANAC AD 2024-07-01) (also referred to as the MCAI), issued by ANAC, which is the aviation authority for Brazil. The MCAI states that a quality escape occurred during manufacturing conc…

Fonte: Federal Register (federalregister.gov). Texto original em inglês. Conteúdo sanitizado por segurança.