Document Headings
Document headings vary by document type but may contain
the following:
•
the agency or agencies that issued and signed a document
•
the number of the CFR title and the number of each part
the document amends, proposes to amend, or is directly
related to
•
the agency docket number / agency internal file number
•
the RIN which identifies each regulatory action listed in
the Unified Agenda of Federal Regulatory and Deregulatory
Actions
See the
Document Drafting Handbook
for more details.
Department of Transportation
Federal Aviation Administration
• 14 CFR Part 39
• [Docket No. FAA-2026-1334; Project Identifier AD-2025-01336-E; Amendment 39-23269; AD 2026-04-09]
• RIN 2120-AA64
( printed page 8721)
AGENCY:
Federal Aviation Administration (FAA), DOT.
ACTION:
Final rule; request for comments.
SUMMARY:
The FAA is adopting a new airworthiness directive (AD) for certain General Electric Company (GE) Model GEnx-1B64, GEnx-1B64/P1, GEnx-1B64/P2, GEnx-1B67, GEnx-1B67/P1, GEnx-1B67/P2, GEnx-1B70, GEnx-1B70/75/P1, GEnx-1B70/75/P2, GEnx-1B70/P1, GEnx-1B70/P2, GEnx-1B70C/P1, GEnx-1B70C/P2, GEnx-1B74/75/P1, GEnx-1B74/75/P2, GEnx-1B76/P2, Genx-1B76A/P2, GEnx-2B67, GEnx-2B67/P, and GEnx-2B67B engines. This AD was prompted by a report of a quality escape for certain high-pressure compressor (HPC) stage 5 blisks manufactured from a single forged ingot with a nonconforming indication. This AD requires replacement of certain HPC stage 5 blisks with parts eligible for installation. The FAA is issuing this AD to address the unsafe condition on these products.
DATES:
This AD is effective March 11, 2026.
The FAA must receive comments on this AD by April 10, 2026.
ADDRESSES:
You may send comments, using the procedures found in 14 CFR 11.43 and 11.45, by any of the following methods:
•
Federal eRulemaking Portal:
Go to
regulations.gov. Follow the instructions for submitting comments.
•
Fax:
(202) 493-2251.
•
Mail:
U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590.
•
Hand Delivery:
Deliver to Mail address above between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays.
AD Docket:
You may examine the AD docket at
regulations.gov
under Docket No. FAA-2026-1334; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, any comments received, and other information. The street address for Docket Operations is listed above.
FOR FURTHER INFORMATION CONTACT:
Itanza Young, Aviation Safety Engineer, FAA, 2200 South 216th Street, Des Moines, WA 98198; phone: (206) 482-6306; email:
itanza.n.young@faa.gov.
SUPPLEMENTARY INFORMATION:
Comments Invited
The FAA invites you to send any written data, views, or arguments about this final rule. Send your comments using a method listed under the
ADDRESSES
section. Include “Docket No. FAA-2026-1334; Project Identifier AD-2025-01336-E” at the beginning of your comments. The most helpful comments reference a specific portion of the final rule, explain the reason for any recommended change, and include supporting data. The FAA will consider all comments received by the closing date and may amend this final rule because of those comments.
Except for Confidential Business Information (CBI) as described in…
Fonte: Federal Register (federalregister.gov). Texto original em inglês.