Document Headings
Document headings vary by document type but may contain
the following:
•
the agency or agencies that issued and signed a document
•
the number of the CFR title and the number of each part
the document amends, proposes to amend, or is directly
related to
•
the agency docket number / agency internal file number
•
the RIN which identifies each regulatory action listed in
the Unified Agenda of Federal Regulatory and Deregulatory
Actions
See the
Document Drafting Handbook
for more details.
Department of Transportation
Federal Aviation Administration
• 14 CFR Part 39
• [Docket No. FAA-2025-1364; Project Identifier AD-2024-00613-E; Amendment 39-23215; AD 2025-25-07]
• RIN 2120-AA64
AGENCY:
Federal Aviation Administration (FAA), DOT.
ACTION:
Final rule.
SUMMARY:
The FAA is adopting a new airworthiness directive (AD) for certain General Electric Company (GE) Model GE90-90B, GE90-94B, GE90-110B1, and GE90-115B engines. This AD was prompted by a manufacturer investigation that revealed certain high-pressure turbine (HPT) stage 1 and HPT stage 2 disks were manufactured from powder metal material suspected to contain iron inclusion. This AD requires replacement of affected HPT stage 1 and HPT stage 2 disks with parts eligible for installation. The FAA is issuing this AD to address the unsafe condition on these products.
DATES:
This AD is effective February 6, 2026.
The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of February 6, 2026.
ADDRESSES:
AD Docket:
You may examine the AD docket at
regulations.gov
under Docket No. FAA-2025-1364; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, any comments received, and other information. The address for Docket Operations is U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590.
Material Incorporated by Reference:
• For GE material identified in this AD, contact GE, 1 Neumann Way, Cincinnati, OH 45215; phone: (513) 552-3272; email:aviation.fleetsupport@ge.com;
website:
ge.com.
( printed page 17)
• You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 1200 District Avenue, Burlington, MA 01803. For information on the availability of this material at the FAA, call (817) 222-5110. It is also available atregulations.gov
under Docket No. FAA-2025-1364.
FOR FURTHER INFORMATION CONTACT:
Alexei Marqueen, Aviation Safety Engineer, FAA, 2200 South 216th Street, Des Moines, WA 98198; phone: (781) 238-7178; email:
alexei.t.marqueen@faa.gov.
SUPPLEMENTARY INFORMATION:
Background
The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain GE Model GE90-90B, GE90-94B, GE90-110B1, and GE90-115B engines. The NPRM was published in the
Federal Register
on July 29, 2025 (90 FR 35642). The NPRM was prompted by the detection of iron inclusion in a turbine disk manufactured from the same powder metal material used to manufacture certain HPT stage 1 and HPT stage 2 disks for GE Model GE90-90B, GE90-94B, GE90-110B1, and GE90-115B engines. Further investigation by the manufacturer revealed that the iron inclusion is attributed to deficiencies in the manufacturing process and may cause reduced material properties and a lower fatigue life capability, which may result in premature fracture and uncontain…
Fonte: Federal Register (federalregister.gov). Texto original em inglês.