- AeroCopilot
- /
- Diretivas de Aeronavegabilidade
- /
- FAA-2025-23794
FAA-2025-23794
Diretivas de Aeronavegabilidade; Aeronaves Diamond Aircraft Industries Inc.
Resumo Rápido
- Número AD
- FAA-2025-23794
- Autoridade
- FAA
- Data de emissão
- 23/12/2025
- Data efetiva
- —
- Criticidade
- routine
Autoridade
Federal Aviation Administration (EUA)
Data de Publicação
23 de dezembro de 2025
Data Efetiva
Não informada
Prazo de Cumprimento
Antes do próximo voo
Resumo da Diretiva
A FAA propõe revogar a Diretriz de Aeronavegabilidade (AD) 2020-14-06, que se aplica a todos os aviões modelo DA 40, DA 40 F e DA 40 NG da Diamond Aircraft Industries Inc. (DAI). A AD 2020-14-06 exige a substituição de peças afetadas, inspeção das câmaras do tanque de combustível e remoção de material de borracha que se desprendeu das mangueiras de conexão do tanque de combustível. A AD 2020-14-06 também proíbe a instalação de peças afetadas em qualquer avião. Desde a emissão da AD 2020-14-06, foram relatadas peças afetadas adicionais instaladas durante a produção em aviões modelo DA 40 NG. Como resultado, o fabricante publicou material de serviço atualizado para o modelo DA 40 NG. Esta AD proposta exigiria as mesmas ações que a AD 2020-14-06 e exigiria que o material de serviço atualizado fosse utilizado para os aviões modelo DA 40 NG. A FAA está propondo esta AD para eliminar a condição insegura nesses produtos.
The FAA proposes to supersede Airworthiness Directive (AD) 2020-14-06, which applies to all Diamond Aircraft Industries Inc. (DAI) Model DA 40, DA 40 F, and DA 40 NG airplanes. AD 2020-14-06 requires replacing affected parts, inspecting the fuel tank chambers, and removing rubber material that has detached from the fuel tank connection hoses. AD 2020-14-06 also prohibits installing an affected part on any airplane. Since the FAA issued AD 2020-14-06, additional affected parts installed during production on Model DA 40 NG airplanes have been reported. As a result, the manufacturer has published updated service material for the Model DA 40 NG. This proposed AD would require the same actions as AD 2020-14-06 and would require updated service material to be used for the Model DA 40 NG airplanes. The FAA is proposing this AD to address the unsafe condition on these products.Texto Completo da Diretiva
Expandir texto completo (Federal Register)Texto completo (Federal Register)
Document Headings Document headings vary by document type but may contain the following: • the agency or agencies that issued and signed a document • the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to • the agency docket number / agency internal file number • the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Transportation Federal Aviation Administration • 14 CFR Part 39 • [Docket No. FAA-2025-5397; Project Identifier MCAI-2025-00972-A] • RIN 2120-AA64 AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed rulemaking (NPRM). SUMMARY: The FAA proposes to supersede Airworthiness Directive (AD) 2020-14-06, which applies to all Diamond Aircraft Industries Inc. (DAI) Model DA 40, DA 40 F, and DA 40 NG airplanes. AD 2020-14-06 requires replacing affected parts, inspecting the fuel tank chambers, and removing rubber material that has detached from the fuel tank connection hoses. AD 2020-14-06 also prohibits installing an affected part on any airplane. Since the FAA issued AD 2020-14-06, additional affected parts installed during production on Model DA 40 NG ( printed page 60032) airplanes have been reported. As a result, the manufacturer has published updated service material for the Model DA 40 NG. This proposed AD would require the same actions as AD 2020-14-06 and would require updated service material to be used for the Model DA 40 NG airplanes. The FAA is proposing this AD to address the unsafe condition on these products. DATES: The FAA must receive comments on this NPRM by February 6, 2026. ADDRESSES: You may send comments, using the procedures found in 14 CFR 11.43 and 11.45, by any of the following methods: • Federal eRulemaking Portal: Go to regulations.gov. Follow the instructions for submitting comments. • Fax: (202) 493-2251. • Mail: U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590. • Hand Delivery: Deliver to Mail address above between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. AD Docket: You may examine the AD docket at regulations.gov under Docket No. FAA-2025-5397; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this NPRM, the mandatory continuing airworthiness information (MCAI), any comments received, and other information. The street address for Docket Operations is listed above. Material Incorporated by Reference: • For Diamond Aircraft Industries material identified in this proposed AD, contact DAI, 1560 Crumlin Sideroad, London, Ontario, Canada, N5V 1S2; phone: (519) 457-4041, fax: (519) 457-4045; email:support-canada@diamondaircraft.com. • You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 901 Locust, Kansas City, MO 64106. For information on the availability of this material at the FAA, call (817) 222-5110. FOR FURTHER INFORMATION CONTACT: Joseph Catanzaro, Aviation Safety Engineer, FAA, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; phone: (516) 228-7366; email: joseph.catanzaro@faa.gov. …
Fonte: Federal Register (federalregister.gov). Texto original em inglês. Conteúdo sanitizado por segurança.
Documentos e Referências
Monitore DAs automaticamente para sua aeronave
Cadastre sua aeronave no AeroCopilot e receba alertas por e-mail e notificação quando novas diretivas de aeronavegabilidade afetarem seu tipo de aeronave.
Dados obtidos do Federal Register (federalregister.gov). As informações são fornecidas para fins de consulta — consulte sempre a fonte oficial para fins de compliance regulatório.