Document Headings
Document headings vary by document type but may contain
the following:
•
the agency or agencies that issued and signed a document
•
the number of the CFR title and the number of each part
the document amends, proposes to amend, or is directly
related to
•
the agency docket number / agency internal file number
•
the RIN which identifies each regulatory action listed in
the Unified Agenda of Federal Regulatory and Deregulatory
Actions
See the
Document Drafting Handbook
for more details.
Department of Transportation
Federal Aviation Administration
• 14 CFR Part 39
• [Docket No. FAA-2024-1880; Project Identifier AD-2023-01149-T; Amendment 39-23088; AD 2025-15-01]
• RIN 2120-AA64
AGENCY:
Federal Aviation Administration (FAA), DOT.
ACTION:
Final rule.
SUMMARY:
The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 737-600, -700, -700C, -800, -900, and -900ER series airplanes. This AD was prompted by a report of a frame web crack at a certain fuselage station (STA) between certain stringers common to the frame web notch. This AD requires repetitive inspections for cracks of the frames and repair of cracks. The FAA is issuing this AD to address the unsafe condition on these products.
DATES:
This AD is effective August 25, 2025.
The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of August 25, 2025.
ADDRESSES:
AD Docket:
You may examine the AD docket at
regulations.gov
under Docket No. FAA-2024-1880; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, any comments received, and other information. The address for Docket Operations is U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590.
Material Incorporated by Reference:
• For Boeing material identified in this AD, contact Boeing Commercial Airplanes, Attention: Contractual & Data Services (C&DS), 2600 Westminster Blvd., MC 110-SK57, Seal Beach, CA 90740-5600; telephone 562-797-1717; websitemyboeingfleet.com.
• You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195. It is also available atregulations.gov
under Docket No. FAA-2024-1880.
FOR FURTHER INFORMATION CONTACT:
Owen Bley-Male, Aviation Safety Engineer, FAA, 2200 South 216th St., Des Moines, WA 98198; phone: 206-231-3992; email:
Owen.F.Bley-Male@faa.gov.
SUPPLEMENTARY INFORMATION:
Background
The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to all The Boeing Company Model 737-600, -700, -700C, -800, -900, and -900ER series airplanes. The NPRM published in the
Federal Register
on July 2, 2024 (89 FR 54737). The NPRM was prompted by a report of a frame web crack at fuselage STA 328 between stringers S-20R and S-21R on a Model 737-700 airplane. The crack was common to the frame web notch and was approximately 0.85 inch long. In the NPRM, the FAA proposed to require repetitive detailed and high frequency eddy current (HFEC) inspections for cracks of the frames and repair of any cracks. The FAA is issuing this AD to address undetected cracks in the frame, which could lead to the inability of the principal structural element to sustain limit loads and result in the subsequent loss of structural integrity of the airplane.
Discussion of Fin…
Fonte: Federal Register (federalregister.gov). Texto original em inglês.