Document Headings
Document headings vary by document type but may contain
the following:
•
the agency or agencies that issued and signed a document
•
the number of the CFR title and the number of each part
the document amends, proposes to amend, or is directly
related to
•
the agency docket number / agency internal file number
•
the RIN which identifies each regulatory action listed in
the Unified Agenda of Federal Regulatory and Deregulatory
Actions
See the
Document Drafting Handbook
for more details.
Department of Transportation
Federal Aviation Administration
• 14 CFR Part 39
• [Docket No. FAA-2025-0628; Project Identifier MCAI-2024-00728-T; Amendment 39-23084; AD 2025-14-06]
• RIN 2120-AA64
AGENCY:
Federal Aviation Administration (FAA), DOT.
ACTION:
Final rule.
SUMMARY:
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A350-941 and -1041 airplanes. This AD was prompted by reports of deep spot faces on rib 9 at the lower flange bolting with the lower spar. This AD requires a special detailed inspection for discrepancies of certain pylon bolts, and applicable corrective actions. The FAA is issuing this AD to address the unsafe condition on these products.
DATES:
This AD is effective August 25, 2025.
The Director of the Federal Register approved the incorporation by reference of certain publications listed in this AD as of August 25, 2025.
ADDRESSES:
AD Docket:
You may examine the AD docket at
regulations.gov
under Docket No. FAA-2025-0628; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, the mandatory continuing airworthiness information (MCAI), any comments received, and other information. The address for Docket Operations is U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590.
Material Incorporated by Reference:
• For Airbus material identified in this AD, contact Airbus SAS, Airworthiness Office—EAL, Rond-Point Emile Dewoitine No: 2, 31700 Blagnac Cedex, France; telephone +33 5 61 93 36 96; fax +33 5 61 93 45 80; emailcontinued-airworthiness.a350@airbus.com;
website
airbus.com.
• For European Union Aviation Safety Agency (EASA) material identified in this AD, contact EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; telephone +49 221 8999 000; emailADs@easa.europa.eu.
You may find this material on the EASA website at
ad.easa.europa.eu.
• You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195. It is also available atregulations.gov
under Docket No. FAA-2025-0628.
FOR FURTHER INFORMATION CONTACT:
Dan Rodina, Aviation Safety Engineer, FAA, 2200 South 216th St., Des Moines, WA 98198; telephone 206-231-3225; email
dan.rodina@faa.gov.
SUPPLEMENTARY INFORMATION:
Background
The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain Airbus SAS Model A350-941 and -1041 airplanes. The NPRM was published in the
Federal Register
on April 29, 2025 (90 FR 17749). The NPRM was prompted by AD 2024-0234, dated December 6, 2024 (EASA AD 2024-0234) (also referred to as the MCAI), issued by EASA, which is the Technical Agent for the Member States of the European Union. The MCAI states deep spot faces have been detected on the prod…
Fonte: Federal Register (federalregister.gov). Texto original em inglês.