FAA

FAA-2025-12671

Airworthiness Directives; The Boeing Company Airplanes

Autoridade

Federal Aviation Administration (EUA)

Data de Publicação

08 de julho de 2025

Data Efetiva

Não informada

Prazo de Cumprimento

Antes do próximo voo

Resumo da Diretiva

PT-BRTradução automática

A FAA propõe adotar uma nova diretiva de aeronavegabilidade (DA) para todos os aviões das séries Boeing Model 757-200, -200PF e -200CB da The Boeing Company (Boeing). Esta DA proposta foi motivada por um relatório de desgaste impróprio do diâmetro interno dos cilindros externos do trem de pouso principal (TPP), resultando em possível dano térmico aos cilindros externos. Esta DA proposta exigiria uma verificação de registros ou inspeção para determinar se um cilindro externo afetado está instalado e a substituição de todos os cilindros externos afetados. A FAA está propondo esta DA para resolver a condição insegura nestes produtos.

ENOriginal (Federal Register)

The FAA proposes to adopt a new airworthiness directive (AD) for all The Boeing Company (Boeing) Model 757-200, -200PF, and -200CB series airplanes. This proposed AD was prompted by a report of improper grinding of the inner diameter of the main landing gear (MLG) outer cylinders, resulting in possible heat damage to the outer cylinders. This proposed AD would require a records check or inspection to determine if an affected outer cylinder is installed and replacing all affected outer cylinders. The FAA is proposing this AD to address the unsafe condition on these products.

Documentos e Referências

📄 PDF Original 🌐 Federal Register

Monitore DAs automaticamente para sua aeronave

Cadastre sua aeronave no AeroCopilot e receba alertas por e-mail e notificação quando novas diretivas de aeronavegabilidade afetarem seu tipo de aeronave.

Criar conta gratuita

Dados obtidos do Federal Register (federalregister.gov). As informações são fornecidas para fins de consulta — consulte sempre a fonte oficial para fins de compliance regulatório.

Texto Completo da Diretiva

Expandir texto completo (Federal Register)

Document Headings Document headings vary by document type but may contain the following: • the agency or agencies that issued and signed a document • the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to • the agency docket number / agency internal file number • the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Transportation Federal Aviation Administration • 14 CFR Part 39 • [Docket No. FAA-2025-1357; Project Identifier AD-2025-00618-T] • RIN 2120-AA64 AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed rulemaking (NPRM). SUMMARY: The FAA proposes to adopt a new airworthiness directive (AD) for all The Boeing Company (Boeing) Model 757-200, -200PF, and -200CB series airplanes. This proposed AD was prompted by a report of improper grinding of the inner diameter of the main landing gear (MLG) outer cylinders, resulting in possible heat damage to the outer cylinders. This proposed AD would require a records check or inspection to determine if an affected outer cylinder is installed and replacing all affected outer cylinders. The FAA is proposing this AD to address the unsafe condition on these products. DATES: The FAA must receive comments on this proposed AD by August 22, 2025. ADDRESSES: You may send comments, using the procedures found in 14 CFR 11.43 and 11.45, by any of the following methods: • Federal eRulemaking Portal: Go to regulations.gov. Follow the instructions for submitting comments. • Fax: 202-493-2251. • Mail: U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590. • Hand Delivery: Deliver to Mail address above between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. AD Docket: You may examine the AD docket at regulations.gov under Docket No. FAA-2025-1357; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this NPRM, any comments received, and other information. The street address for Docket Operations is listed above. Material Incorporated by Reference: • For Boeing material identified in this proposed AD, contact Boeing Commercial Airplanes, Attention: Contractual & Data Services (C&DS), 2600 Westminster Blvd., MC 110-SK57, Seal Beach, CA 90740-5600; telephone 562-797-1717; websitemyboeingfleet.com. • You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195. It is also available atregulations.gov under Docket No. FAA-2025-1357. FOR FURTHER INFORMATION CONTACT: Stefanie Roesli, Aviation Safety Engineer, FAA, 2200 South 216th St., Des Moines, WA 98198; phone: 206-231-3964; email: stefanie.n.roesli@faa.gov. SUPPLEMENTARY INFORMATION: Comments Invited The FAA invites you to send any written relevant data, views, or arguments about this proposal. Send your comments using a method listed under the ADDRESSES section. Include “Docket No. FAA-2025-1357; Project Identifier AD-2025-00…

Fonte: Federal Register (federalregister.gov). Texto original em inglês.