FAA-2025-11050
Airworthiness Directives; The Boeing Company Airplanes
Resumo Rápido
- Número AD
- FAA-2025-11050
- Autoridade
- FAA
- Data de emissão
- 16/06/2025
- Data efetiva
- —
- Criticidade
- routine
Autoridade
Federal Aviation Administration (EUA)
Data de Publicação
16 de junho de 2025
Data Efetiva
Não informada
Prazo de Cumprimento
Antes do próximo voo
Resumo da Diretiva
A FAA propõe superseder a Diretiva de Aeronavegabilidade (DA) 2024-01-01, que se aplica a certos aviões The Boeing Company modelo 787-8, 787-9 e 787-10. A DA 2024-01-01 exige inspeções visuais gerais (IVGs) repetitivas da área sob todos os lavatórios para detecção de evidências de vazamentos intermitentes e ativos no módulo de controle da torneira (MCT) e ações condicionais aplicáveis. A FAA determinou que os MCTs afetados devem ser substituídos por um MCT de design melhorado para eliminar a condição insegura. Esta DA proposta continuaria a exigir as ações da DA 2024-01-01 e exigiria a substituição do MCT como ação de encerramento das IVGs repetitivas, execução de ensaio de vazamento, instalação de dispositivos de gestão de umidade e execução de ações condicionais aplicáveis. A FAA propõe esta DA para eliminar a condição insegura nestes produtos.
The FAA proposes to supersede Airworthiness Directive (AD) 2024-01-01, which applies to certain The Boeing Company Model 787-8, 787-9, and 787-10 airplanes. AD 2024-01-01 requires repetitive general visual inspections (GVIs) of the area under all lavatory washbasins for evidence of intermittent and active leaks at the faucet control module (FCM) and applicable on-condition actions. The FAA has determined that the affected FCMs must be replaced with an improved design FCM to address the unsafe condition. This proposed AD would continue to require the actions of AD 2024-01-01 and would require replacing the FCM as terminating action for the repetitive GVIs, performing a leak test, installing moisture management devices, and performing applicable on-condition actions. The FAA is proposing this AD to address the unsafe condition on these products.Texto Completo da Diretiva
Expandir texto completo (Federal Register)Texto completo (Federal Register)
Document Headings Document headings vary by document type but may contain the following: • the agency or agencies that issued and signed a document • the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to • the agency docket number / agency internal file number • the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Transportation Federal Aviation Administration • 14 CFR Part 39 • [Docket No. FAA-2025-1103; Project Identifier AD-2024-00141-T] • RIN 2120-AA64 AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed rulemaking (NPRM). SUMMARY: The FAA proposes to supersede Airworthiness Directive (AD) 2024-01-01, which applies to certain The Boeing Company Model 787-8, 787-9, and 787-10 airplanes. AD 2024-01-01 requires repetitive general visual inspections (GVIs) of the area under all lavatory washbasins for evidence of intermittent and active leaks at the faucet control module (FCM) and applicable on-condition actions. The FAA has determined that the affected FCMs must be replaced with an improved design FCM to address the unsafe condition. This proposed AD would continue to require the actions of AD 2024-01-01 and would require replacing the FCM as terminating action for the repetitive GVIs, performing a leak test, installing moisture management devices, and performing applicable on-condition actions. The FAA is proposing this AD to address the unsafe condition on these products. DATES: The FAA must receive comments on this proposed AD by July 31, 2025. ADDRESSES: You may send comments, using the procedures found in 14 CFR 11.43 and 11.45, by any of the following methods: • Federal eRulemaking Portal: Go to regulations.gov. Follow the instructions for submitting comments. • Fax: 202-493-2251. • Mail: U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590. • Hand Delivery: Deliver to Mail address above between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. AD Docket: You may examine the AD docket at regulations.gov under Docket No. FAA-2025-1103; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this NPRM, any comments received, and other information. The street address for Docket Operations is listed above. Material Incorporated by Reference: • For the Boeing material identified in this proposed AD, contact Boeing Commercial Airplanes, Attention: Contractual & Data Services (C&DS), 2600 Westminster Blvd., MC 110-SK57, Seal Beach, CA 90740-5600; telephone 562-797-1717; websitemyboeingfleet.com. • You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195. It is also available atregulations.gov under Docket No. FAA-2025-1103. FOR FURTHER INFORMATION CONTACT: Courtney Tuck, Aviation Safety Engineer, FAA, 2200 South 216th St., Des Moines, WA 98198; phone: 206-231-3986; email: Courtney.K.Tuck@faa.gov. SUPPLEMENTARY INFORMATION: ( printed page 25167) …
Fonte: Federal Register (federalregister.gov). Texto original em inglês. Conteúdo sanitizado por segurança.
Documentos e Referências
Monitore DAs automaticamente para sua aeronave
Cadastre sua aeronave no AeroCopilot e receba alertas por e-mail e notificação quando novas diretivas de aeronavegabilidade afetarem seu tipo de aeronave.
Dados obtidos do Federal Register (federalregister.gov). As informações são fornecidas para fins de consulta — consulte sempre a fonte oficial para fins de compliance regulatório.