FAA

FAA-2024-22258

Airworthiness Directives; Airbus SAS Airplanes

Autoridade

Federal Aviation Administration (EUA)

Data de Publicação

30 de setembro de 2024

Data Efetiva

04 de novembro de 2024

Prazo de Cumprimento

Antes do próximo voo

Resumo da Diretiva

PT-BRTradução automática

A FAA está adotando uma nova diretriz de aeronavegabilidade (AD) para certos aviões Airbus SAS modelos A330-243, -302, -343 e -941. Esta AD foi motivada pela determinação de que um determinado painel de cobertura do anteparo traseiro pode ter sido fabricado com material não-conforme. Esta AD exige a substituição do painel de cobertura do anteparo traseiro e proíbe a instalação de peças afetadas, conforme especificado em uma AD da Agência Europeia de Segurança da Aviação (EASA), a qual é incorporada por referência. A FAA está emitindo esta AD para solucionar a condição de insegurança nesses produtos.

ENOriginal (Federal Register)

The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A330-243, -302, -343, and -941 airplanes. This AD was prompted by a determination that a certain aft bulkhead cover panel may have been made with a non-conforming material. This AD requires replacing the aft bulkhead cover panel and prohibits the installation of affected parts, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.

Documentos e Referências

📄 PDF Original 🌐 Federal Register

Monitore DAs automaticamente para sua aeronave

Cadastre sua aeronave no AeroCopilot e receba alertas por e-mail e notificação quando novas diretivas de aeronavegabilidade afetarem seu tipo de aeronave.

Criar conta gratuita

Dados obtidos do Federal Register (federalregister.gov). As informações são fornecidas para fins de consulta — consulte sempre a fonte oficial para fins de compliance regulatório.

Texto Completo da Diretiva

Expandir texto completo (Federal Register)

Document Headings Document headings vary by document type but may contain the following: • the agency or agencies that issued and signed a document • the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to • the agency docket number / agency internal file number • the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Transportation Federal Aviation Administration • 14 CFR Part 39 • [Docket No. FAA-2024-1288; Project Identifier MCAI-2024-00063-T; Amendment 39-22818; AD 2024-16-12] • RIN 2120-AA64 AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule. SUMMARY: The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A330-243, -302, -343, and -941 airplanes. This AD was prompted by a determination that a certain aft bulkhead cover panel may have been made with a non-conforming material. This AD requires replacing the aft bulkhead cover panel and prohibits the installation of affected parts, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products. DATES: This AD is effective November 4, 2024. The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of November 4, 2024. ADDRESSES: ( printed page 79419) AD Docket: You may examine the AD docket at regulations.gov under Docket No. FAA-2024-1288; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, the mandatory continuing airworthiness information (MCAI), any comments received, and other information. The address for Docket Operations is U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590. Material Incorporated by Reference: • For EASA material identified in this AD, contact EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; telephone +49 221 8999 000; emailADs@easa.europa.eu; website easa.europa.eu. You may find this material on the EASA website at ad.easa.europa.eu. • You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th Street, Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195. It is also available atregulations.gov under Docket No. FAA-2024-1288. FOR FURTHER INFORMATION CONTACT: Vladimir Ulyanov, Aviation Safety Engineer, FAA, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; telephone: 206-231-3229; email: vladimir.ulyanov@faa.gov. SUPPLEMENTARY INFORMATION: Background The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain Airbus SAS Model A330-243, -302, -343, and -941 airplanes. The NPRM published in the Federal Register on May 6, 2024 (89 FR 37142). The NPRM was prompted by AD 2024-0023, dated January 23, 2024, issued by EASA, which is the Technical Agent for the Member States of the European Union (EASA AD 2024-0023) (also referred to as the MCAI). The MCAI states that a certain aft bulkhead cover panel may have been made with a non-conforming material. This panel is installed in galley G4 a…

Fonte: Federal Register (federalregister.gov). Texto original em inglês. Conteúdo sanitizado por segurança.