2026-06628

Document Headings Document headings vary by document type but may contain the following: • the agency or agencies that issued and signed a document • the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to • the agency docket number / agency internal file number • the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Transportation Federal Aviation Administration • 14 CFR Part 39 • [Docket No. FAA-2025-2547; Project Identifier MCAI-2025-00242-T; Amendment 39-23299; AD 2026-07-04] • RIN 2120-AA64 ( printed page 17129) AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule. SUMMARY: The FAA is adopting a new airworthiness directive (AD) for certain Airbus Canada Limited Partnership Model BD-500-1A10 and BD-500-1A11 airplanes. This AD was prompted by a report that, during a quality check in production, it was found that some of the tie rods supporting the overhead stowage compartments in the passenger cabin did not have enough thread engagement of the turnbuckle into the tie rod. This AD requires an inspection for proper thread engagement of the tie rods and, if necessary, adjustment of the tie rod engagement. The FAA is issuing this AD to address the unsafe condition on these products. DATES: This AD is effective May 11, 2026. The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of May 11, 2026. ADDRESSES: AD Docket: You may examine the AD docket at regulations.gov under Docket No. FAA-2025-2547; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, the mandatory continuing airworthiness information (MCAI), any comments received, and other information. The address for Docket Operations is U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590. Material Incorporated by Reference: • For Transport Canada material identified in this AD, contact Transport Canada, Transport Canada National Aircraft Certification, 159 Cleopatra Drive, Nepean, Ontario K1A 0N5, Canada; telephone 888-663-3639; emailTC.AirworthinessDirectives-Consignesdenavigabilite.TC@tc.gc.ca. You may find this material on the Transport Canada website at tc.canada.ca/en/aviation. • You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195. It is also available atregulations.gov under Docket No. FAA-2025-2547. FOR FURTHER INFORMATION CONTACT: Camille Seay, Aviation Safety Engineer, FAA, 2200 South 216th St., Des Moines, WA 98198; phone: 817-222-5149; email: camille.l.seay@faa.gov. SUPPLEMENTARY INFORMATION: Background The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain Airbus Canada Limited Partnership Model BD-500-1A10 and BD-500-1A11 airplanes. The NPRM was published in the Federal Register on September 16, 2025 (90 FR 44587). The NPRM was prompted by AD CF-2025-11, dated March 3, 2025 (Transport Canada AD CF-2025-11) (also referred to as the MCAI), issued by Transport Canada, which is the aviation authority for Canada. The MCAI states that during a quality check in production, it was found that some of t…

Fonte: Federal Register (federalregister.gov). Texto original em inglês. Conteúdo sanitizado por segurança.