2025-24182

Document Headings Document headings vary by document type but may contain the following: • the agency or agencies that issued and signed a document • the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to • the agency docket number / agency internal file number • the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Transportation Federal Aviation Administration • 14 CFR Part 39 • [Docket No. FAA-2025-0612; Project Identifier MCAI-2023-00935-R; Amendment 39-23214; AD 2025-25-06] • RIN 2120-AA64 AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule. SUMMARY: The FAA is adopting a new airworthiness directive (AD) for all Airbus Helicopters Model SA341G and SA342J helicopters. This AD was prompted by reports of disbonding of the stainless steel leading edge protection of certain part-numbered main rotor blades (MRB). This AD requires repetitively tap inspecting the MRB and, depending on the results, repairing or replacing the MRB. This AD also prohibits installing those MRB unless certain requirements are met. The FAA is issuing this AD to address the unsafe condition on these products. DATES: This AD is effective February 6, 2026. The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of February 6, 2026. ADDRESSES: AD Docket: You may examine the AD docket at regulations.gov under Docket No. FAA-2025-0612; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, the mandatory continuing airworthiness information (MCAI), any comments received, and other information. The address for Docket Operations is U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590. Material Incorporated by Reference: • For European Union Aviation Safety Agency (EASA) material identified in this AD, contact EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; phone: +49 221 8999 000; email:ADs@easa.europa.eu; website: easa.europa.eu. You may find this material on the EASA website at ad.easa.europa.eu. • You may view this material at the FAA, Office of the Regional Counsel, Southwest Region, 10101 Hillwood Parkway, Room 6N-321, Fort Worth, TX 76177. For information on the availability of this material at the FAA, call (817) 222-5110. It is also available atregulations.gov under Docket No. FAA-2025-0612. FOR FURTHER INFORMATION CONTACT: Zain Jamal, Aviation Safety Engineer, FAA, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; phone: (847) 294-7264; email: zain.jamal@faa.gov. SUPPLEMENTARY INFORMATION: Background The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to all Airbus Helicopters Model SA341G and SA342J helicopters. The NPRM was published in the Federal Register on April 7, 2025 (90 FR 14922). The NPRM was prompted by AD 2023-0155, dated July 31, 2023 (EASA AD 2023-0155) (also referred to as the MCAI), issued by EASA, which is the Technical Agent for the Member States of the European Union. The MCAI states that reports were received of the stainless steel leading edge protection disbonding on certain part-numbered MRBs. This condition, if not detected and addressed, …

Fonte: Federal Register (federalregister.gov). Texto original em inglês. Conteúdo sanitizado por segurança.