2025-09514

Document Headings Document headings vary by document type but may contain the following: • the agency or agencies that issued and signed a document • the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to • the agency docket number / agency internal file number • the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Transportation Federal Aviation Administration • 14 CFR Part 39 • [Docket No. FAA-2025-0203; Project Identifier MCAI-2024-00360-T; Amendment 39-23042; AD 2025-10-08] • RIN 2120-AA64 AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule. SUMMARY: The FAA is adopting a new airworthiness directive (AD) for certain ATR—GIE Avions de Transport Régional Model ATR42-500 and ATR72-212A airplanes. This AD was prompted by a report of potential use of improper material during the production of vertical tail plane (VTP) fittings. This AD requires, for certain airplanes, an inspection for the material of affected fuselage-to-VTP fittings, an inspection report, and corrective actions, and, for certain other airplanes, part replacement, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products. DATES: This AD is effective July 2, 2025. The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of July 2, 2025. ADDRESSES: AD Docket: You may examine the AD docket at regulations.gov under Docket No. FAA-2025-0203; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, the mandatory continuing airworthiness information (MCAI), any comments received, and other information. The address for Docket Operations is U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590. Material Incorporated by Reference: • For EASA material identified in this AD, contact EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; telephone +49 221 8999 000; emailADs@easa.europa.eu. You may find this material on the EASA website at ad.easa.europa.eu. • You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195. It is also available atregulations.gov under Docket No. FAA-2025-0203. FOR FURTHER INFORMATION CONTACT: Darren Gassetto, Aviation Safety Engineer, FAA, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; phone: 516-228-7323; email: 9-AVS-AIR-BACO-COS@faa.gov. SUPPLEMENTARY INFORMATION: Background The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain ATR—GIE Avions de Transport Régional Model ATR42-500 and ATR72-212A airplanes. The NPRM was published in the Federal Register on February 18, 2025 (90 FR 9698). The NPRM was prompted by AD 2024-0120, dated June 27, 2024 (EASA AD 2024-0120) (also referred to as the MCAI), issued by EASA, which is the Technical Agent for the Member States of the European Union. The MCAI states that there was a report of potential use of improper material during the production of fuselage-to-VTP fittings. After thi…

Fonte: Federal Register (federalregister.gov). Texto original em inglês. Conteúdo sanitizado por segurança.