- AeroCopilot
- /
- Diretivas de Aeronavegabilidade
- /
- 2025-04441
2025-04441
Diretivas de Aeronavegabilidade; Motores Pratt & Whitney Canada Corp.
Resumo Rápido
- Número AD
- 2025-04441
- Autoridade
- FAA
- Data de emissão
- 19/03/2025
- Data efetiva
- 23/04/2025
- Criticidade
- routine
Autoridade
Federal Aviation Administration (EUA)
Data de Publicação
19 de março de 2025
Data Efetiva
23 de abril de 2025
Prazo de Cumprimento
Antes do próximo voo
Resumo da Diretiva
A FAA está adotando uma nova Diretiva de Aeronavegabilidade (AD) para determinados motores Pratt & Whitney Canada Corp. (P&WC) Modelos PW535E e PW535E1. Esta AD foi motivada por uma revisão de projeto do fabricante que indicou que certos parafusos de flange que fixam o invólucro do gerador de gases e o invólucro de suporte da turbina são susceptíveis a trincas em sua vida atual de fadiga de baixo ciclo (LCF). Esta AD requer inspeções repetitivas por boroscópio (BSI) dos parafusos de retenção do invólucro do gerador de gases ao invólucro de suporte da turbina para detectar evidências de trincas de parafusos, fraturas de parafusos, parafusos ausentes ou parafusos soltos e substituição, se necessário, conforme especificado em uma AD da Transport Canada, que é incorporada por referência. A FAA está emitindo esta AD para tratar a condição insegura nesses produtos.
The FAA is adopting a new airworthiness directive (AD) for certain Pratt & Whitney Canada Corp. (P&WC) Model PW535E and PW535E1 engines. This AD was prompted by a manufacturer design review that indicated certain flange bolts securing the gas generator case and turbine support case are susceptible to cracking at their current low- cycle fatigue (LCF) life. This AD requires repetitive borescope inspections (BSI) of the gas generator case to turbine support case retaining bolts for evidence of bolt cracks, bolt fracture, missing bolts, or loose bolts and replacement, if necessary, as specified in a Transport Canada AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.Texto Completo da Diretiva
Expandir texto completo (Federal Register)Texto completo (Federal Register)
Document Headings Document headings vary by document type but may contain the following: • the agency or agencies that issued and signed a document • the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to • the agency docket number / agency internal file number • the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Transportation Federal Aviation Administration • 14 CFR Part 39 • [Docket No. FAA-2024-2539; Project Identifier MCAI-2023-00971-E; Amendment 39-22985; AD 2025-05-13] • RIN 2120-AA64 AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule. SUMMARY: The FAA is adopting a new airworthiness directive (AD) for certain Pratt & Whitney Canada Corp. (P&WC) Model PW535E and PW535E1 engines. This AD was prompted by a manufacturer design review that indicated certain flange bolts securing the gas generator case and turbine support case are susceptible to cracking at their current low-cycle fatigue (LCF) life. This AD requires repetitive borescope inspections (BSI) of the gas generator case to turbine support case retaining bolts for evidence of bolt cracks, bolt fracture, missing bolts, or loose bolts and replacement, if necessary, as specified in a Transport Canada AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products. ( printed page 12680) DATES: This AD is effective April 23, 2025. The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of April 23, 2025. ADDRESSES: AD Docket: You may examine the AD docket at regulations.gov under Docket No.FAA-2024-2539; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, the mandatory continuing airworthiness information (MCAI), any comments received, and other information. The address for Docket Operations is U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590. Material Incorporated by Reference: • For Transport Canada material identified in this AD, contact Transport Canada, Transport Canada National Aircraft Certification, 159 Cleopatra Drive, Nepean, Ontario, K1A 0N5, Canada; phone: (888) 663-3639; email:TC.AirworthinessDirectives-Consignesdenavigabilite.TC@tc.gc.ca; website: tc.canada.ca/en/aviation. • You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 1200 District Avenue, Burlington, MA 01803. For information on the availability of this material at the FAA, call (817) 222-5110. It is also available atregulations.gov under Docket No. FAA-2024-2539. FOR FURTHER INFORMATION CONTACT: Barbara Caufield, Aviation Safety Engineer, FAA, 2200 South 216th Street, Des Moines, WA 98198; phone: (781) 238-7146; email: barbara.caufield@faa.gov. SUPPLEMENTARY INFORMATION: Background The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain P&WC Model PW535E and PW535E1 engines. The NPRM published in the Federal Register on November 26, 2024 (89 FR 93225). The NPRM was prompted by Transport Canada AD CF-2023-60, dated August 14, 2023 (Transport Canada AD CF-2023-60) (also referred to as the MCAI), issued by Transport Canada…
Fonte: Federal Register (federalregister.gov). Texto original em inglês. Conteúdo sanitizado por segurança.
Documentos e Referências
Monitore DAs automaticamente para sua aeronave
Cadastre sua aeronave no AeroCopilot e receba alertas por e-mail e notificação quando novas diretivas de aeronavegabilidade afetarem seu tipo de aeronave.
Dados obtidos do Federal Register (federalregister.gov). As informações são fornecidas para fins de consulta — consulte sempre a fonte oficial para fins de compliance regulatório.