2024-28134

Document Headings Document headings vary by document type but may contain the following: • the agency or agencies that issued and signed a document • the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to • the agency docket number / agency internal file number • the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Transportation Federal Aviation Administration • 14 CFR Part 39 • [Docket No. FAA-2024-1897; Project Identifier AD-2023-00774-T; Amendment 39-22882; AD 2024-23-03] • RIN 2120-AA64 AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule. SUMMARY: The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 737-300 and -400 series airplanes. This AD was prompted by a report that flight control rigging tolerances could result in spoiler deflection not reaching the minimal level required to engage the cruise thrust split monitor (MONFD) used by the autothrottle (A/T) system. This AD requires changing certain wire bundles, installing a new housing assembly, removing the mechanical aileron force limiter (MAFL), doing an inspection or records check to determine if certain flight control computers (FCCs) are installed, and performing applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products. DATES: This AD is effective January 6, 2025. The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of January 6, 2025. ADDRESSES: AD Docket: You may examine the AD docket at regulations.gov under Docket No. FAA-2024-1897; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, any comments received, and other information. The address for Docket Operations is U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590. Material Incorporated by Reference: • For Boeing material identified in this AD, contact Boeing Commercial Airplanes, Attention: Contractual & Data Services (C&DS), 2600 Westminster Blvd., MC 110-SK57, Seal Beach, CA 90740-5600; telephone 562-797-1717; websitemyboeingfleet.com. • You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195. It is also available atregulations.gov under Docket No. FAA-2024-1897. FOR FURTHER INFORMATION CONTACT: Eric Igama, Aviation Safety Engineer, FAA, 2200 South 216th Street, Des Moines, WA 98198; telephone 562-627-5388; email roderick.igama@faa.gov. SUPPLEMENTARY INFORMATION: Background The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain The Boeing Company Model 737-300 and -400 series airplanes. The NPRM published in the Federal Register on July 29, 2024 (89 FR 60836). The NPRM was prompted by a report indicating that flight control rigging tolerances could result in spoiler deflection not reaching the minimal level required to engage the MONFD used by the A/T system. In the NPRM, the FAA proposed to require changing certain wire bundles, installing a new housing assembly, removing the mechanical aileron force limiter (MAFL), doing an inspection or records check to determine if certain …

Fonte: Federal Register (federalregister.gov). Texto original em inglês. Conteúdo sanitizado por segurança.