2024-28125

Document Headings Document headings vary by document type but may contain the following: • the agency or agencies that issued and signed a document • the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to • the agency docket number / agency internal file number • the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Transportation Federal Aviation Administration • 14 CFR Part 39 • [Docket No. FAA-2024-2015; Project Identifier MCAI-2023-00769-T; Amendment 39-22887; AD 2024-23-08] • RIN 2120-AA64 AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule. SUMMARY: The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-1A10 and BD-700-1A11 airplanes. This AD was prompted by reports of missing or damaged inboard flap seal plate assemblies. This AD requires repetitive inspections for cracks of the attaching angles of the inboard flap seal plates and replacement. The FAA is issuing this AD to address the unsafe condition on these products. DATES: This AD is effective January 6, 2025. The Director of the Federal Register approved the incorporation by reference of certain publications listed in this AD as of January 6, 2025. ADDRESSES: AD Docket: You may examine the AD docket at regulations.gov under Docket No. FAA-2024-2015; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, the mandatory continuing airworthiness information (MCAI), any comments received, and other information. The address for Docket Operations is U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590. Material Incorporated by Reference: • For Bombardier material identified in this AD, contact Bombardier Business Aircraft Customer Response Center, 400 Côte-Vertu Road West, Dorval, Québec H4S 1Y9, Canada; telephone 514-855-2999; emailac.yul@aero.bombardier.com; website bombardier.com. • You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195. It is also available atregulations.gov under Docket No. FAA-2024-2015. FOR FURTHER INFORMATION CONTACT: Yaser Osman, Aviation Safety Engineer, FAA, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; telephone 516-228-7300; email 9-avs-nyaco-cos@faa.gov. SUPPLEMENTARY INFORMATION: Background The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain Bombardier, Inc., Model BD-700-1A10 and BD-700-1A11 airplanes. The NPRM published in the ( printed page 95096) Federal Register on August 9, 2024 (89 FR 65264). The NPRM was prompted by AD CF-2023-42, dated June 19, 2023, issued by Transport Canada, which is the aviation authority for Canada (referred to after this as the MCAI). The MCAI states that there have been multiple reports in service of missing or damaged inboard flap seal plates. An investigation revealed a premature fatigue failure mode of the inboard flap seal plates. Left uncorrected, an inboard flap seal plate may partially or totally detach. Under certain flight conditions, a missing inboard flap seal plate could lead to exces…

Fonte: Federal Register (federalregister.gov). Texto original em inglês. Conteúdo sanitizado por segurança.