- AeroCopilot
- /
- Diretivas de Aeronavegabilidade
- /
- 2024-28120
2024-28120
Diretivas de Aeronavegabilidade; Aviões The Boeing Company
Resumo Rápido
- Número AD
- 2024-28120
- Autoridade
- FAA
- Data de emissão
- 02/12/2024
- Data efetiva
- 06/01/2025
- Criticidade
- routine
Autoridade
Federal Aviation Administration (EUA)
Data de Publicação
02 de dezembro de 2024
Data Efetiva
06 de janeiro de 2025
Prazo de Cumprimento
Antes do próximo voo
Resumo da Diretiva
A FAA está adotando uma nova diretiva de aeronavegabilidade (AD) para certos aviões The Boeing Company modelo 737-8, 737-9 e 737-8200 (737 MAX). Esta AD foi motivada por um relato de instalação não-conforme de feixes de cabos do spoiler que resultou em movimento não intencional do spoiler, incluindo um caso de travamento total de um spoiler de voo. Investigação adicional identificou o potencial de travamento total de mais de um spoiler de voo na mesma asa, que pode exceder a capacidade de controle lateral completo, levando à perda de controle do avião. Esta AD requer inspeção única da folga entre os feixes de cabos de controle do spoiler e a estrutura adjacente, e ações conforme necessário aplicáveis. A FAA está emitindo esta AD para resolver a condição insegura nesses produtos.
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 737-8, 737-9, and 737-8200 (737 MAX) airplanes. This AD was prompted by a report of a non-conforming installation of spoiler wire bundles that led to unintended spoiler motion, including one instance of a flight spoiler hardover. Further investigation identified the potential for a hardover of more than one flight spoiler on the same wing, which can exceed full lateral control capability leading to loss of control of the airplane. This AD requires a one-time inspection of the clearance between the spoiler control wire bundles and the adjacent structure, and applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products.Texto Completo da Diretiva
Expandir texto completo (Federal Register)Texto completo (Federal Register)
Document Headings Document headings vary by document type but may contain the following: • the agency or agencies that issued and signed a document • the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to • the agency docket number / agency internal file number • the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Transportation Federal Aviation Administration • 14 CFR Part 39 • [Docket No. FAA-2024-0463; Project Identifier AD-2023-00792-T; Amendment 39-22890; AD 2024-23-11] • RIN 2120-AA64 AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule. SUMMARY: The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 737-8, 737-9, and 737-8200 (737 MAX) airplanes. This AD was prompted by a report of a non-conforming installation of spoiler wire bundles that led to unintended spoiler motion, including one instance of a flight spoiler hardover. Further investigation identified the potential for a hardover of more than one flight spoiler on the same wing, which can exceed full lateral control capability leading to loss of control of the airplane. This AD requires a one-time inspection of the clearance between the spoiler control wire bundles and the adjacent structure, and applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products. DATES: This AD is effective January 6, 2025. The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of January 6, 2025. ADDRESSES: AD Docket: You may examine the AD docket at regulations.gov under Docket No. FAA-2024-0463; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, any comments received, and other information. The address for Docket Operations is U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590. Material Incorporated by Reference: • For Boeing material identified in this AD, contact Boeing Commercial Airplanes, Attention: Contractual & Data Services (C&DS), 2600 Westminster Blvd., MC 110-SK57, Seal Beach, CA 90740-5600; telephone 562-797-1717; websitemyboeingfleet.com. • You may view this material at the FAA, Airworthiness Products Section, ( printed page 95093) Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195. It is also available at regulations.gov under Docket No. FAA-2024-0463. FOR FURTHER INFORMATION CONTACT: Michael Closson, Aviation Safety Engineer, FAA, 2200 South 216th St., Des Moines, WA 98198; phone: 206-231-3973; email: Michael.P.Closson@faa.gov. SUPPLEMENTARY INFORMATION: Background The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain The Boeing Company Model 737-8, 737-9, and 737-8200 airplanes. The NPRM published in the Federal Register on March 11, 2024 (89 FR 17346). The NPRM was prompted by a report of a non-conforming installation of flight spoiler control wire bundles that led to unintended spoiler motion, including one instance of flight spoiler hardover. Further investigation identified the potential for simultaneous time-limited hardovers of more than one f…
Fonte: Federal Register (federalregister.gov). Texto original em inglês. Conteúdo sanitizado por segurança.
Documentos e Referências
Monitore DAs automaticamente para sua aeronave
Cadastre sua aeronave no AeroCopilot e receba alertas por e-mail e notificação quando novas diretivas de aeronavegabilidade afetarem seu tipo de aeronave.
Dados obtidos do Federal Register (federalregister.gov). As informações são fornecidas para fins de consulta — consulte sempre a fonte oficial para fins de compliance regulatório.