2024-27596

Document Headings Document headings vary by document type but may contain the following: • the agency or agencies that issued and signed a document • the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to • the agency docket number / agency internal file number • the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Transportation Federal Aviation Administration • 14 CFR Part 39 • [Docket No. FAA-2024-2008; Project Identifier AD-2024-00122-T; Amendment 39-22876; AD 2024-22-05] • RIN 2120-AA64 AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule. SUMMARY: The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 787-8, 787-9, and 787-10 airplanes. This AD was prompted by a report that during manufacture of drag brace lower lock link assemblies for the main landing gear (MLG), a certain required ( printed page 93155) inspection was not performed. This AD requires doing a check of maintenance records or an inspection to determine if certain drag brace lower lock link assemblies are installed, and applicable on-condition actions. This AD also prohibits the installation of affected parts. The FAA is issuing this AD to address the unsafe condition on these products. DATES: This AD is effective December 31, 2024. The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of December 31, 2024. ADDRESSES: AD Docket: You may examine the AD docket at regulations.gov under Docket No. FAA-2024-2008; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, any comments received, and other information. The address for Docket Operations is U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590. Material Incorporated by Reference: • For material identified in this AD, contact Boeing Commercial Airplanes, Attention: Contractual & Data Services (C&DS), 2600 Westminster Blvd., MC 110-SK57, Seal Beach, CA 90740-5600; telephone 562-797-1717; websitemyboeingfleet.com. • You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195. It is also available atregulations.gov under Docket No. FAA-2024-2008. FOR FURTHER INFORMATION CONTACT: Joseph Hodgin, Aviation Safety Engineer, FAA, 2200 South 216th St., Des Moines, WA 98198; phone: 206-231-3962; email: joseph.j.hodgin@faa.gov. SUPPLEMENTARY INFORMATION: Background The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to all The Boeing Company Model 787-8, 787-9, and 787-10 airplanes. The NPRM published in the Federal Register on August 1, 2024 (89 FR 62685). The NPRM was prompted by a report that during manufacture of drag brace lower lock link assemblies for the MLG, a certain required inspection was not performed. In the NPRM, the FAA proposed to require doing a check of maintenance records or an inspection to determine if certain drag brace lower lock link assemblies are installed, and applicable on-condition actions. The FAA is issuing this AD to address u…

Fonte: Federal Register (federalregister.gov). Texto original em inglês. Conteúdo sanitizado por segurança.