2024-09338

Document Headings Document headings vary by document type but may contain the following: • the agency or agencies that issued and signed a document • the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to • the agency docket number / agency internal file number • the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Transportation Federal Aviation Administration • 14 CFR Part 39 • [Docket No. FAA-2023-1214; Project Identifier AD-2023-00181-T; Amendment 39-22726; AD 2024-07-05] • RIN 2120-AA64 AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule. SUMMARY: The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 757-200, 757-200CB, and 757-300 airplanes. This AD was prompted by cracks on both sides of the airplane in the station (STA) 1640 frame web between S-14 and S-15. This AD requires an inspection or maintenance records check for existing liner holes in the STA 1640 frame web between S-14 and S-15, and applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products. DATES: This AD is effective June 5, 2024. The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of June 5, 2024. ADDRESSES: AD Docket: You may examine the AD docket at regulations.gov under Docket No. FAA-2023-1214; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, any comments received, and other information. The address for Docket Operations is U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590. Material Incorporated by Reference: • For Boeing material, contact Boeing Commercial Airplanes, Attention: Contractual & Data Services (C&DS), 2600 Westminster Blvd., MC 110-SK57, Seal Beach, CA 90740-5600; telephone 562-797-1717; websitemyboeingfleet.com. • You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195. It is also available atregulations.gov under Docket No. FAA-2023-1214. FOR FURTHER INFORMATION CONTACT: Wayne Ha, Aviation Safety Engineer, FAA, 2200 South 216th Street, Des Moines, WA 98198; phone: 562-627-5238; email: Wayne.Ha@faa.gov. SUPPLEMENTARY INFORMATION: Background The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain The Boeing Company Model 757-200, 757-200CB, and 757-300 airplanes. The NPRM published in the Federal Register on July 21, 2023 (88 FR 47090). The NPRM was prompted by cracks on both sides of the airplane at certain stringers. In the NPRM, the FAA proposed to require an inspection or a maintenance records check for existing liner holes at certain stringers, and applicable on-condition actions. The FAA is issuing this AD to address liner holes that could create a stress concentration around the hole and lead to cracks, which could result in the inability of a structural element to sustain limit load and could adversely affect the structural integrity of the airplane. Discussion of Final Airworthiness Directive Comments The FAA rec…

Fonte: Federal Register (federalregister.gov). Texto original em inglês. Conteúdo sanitizado por segurança.