2023-26404

Document Headings Document headings vary by document type but may contain the following: • the agency or agencies that issued and signed a document • the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to • the agency docket number / agency internal file number • the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Transportation Federal Aviation Administration • 14 CFR Part 39 • [Docket No. FAA-2023-1409; Project Identifier MCAI-2022-01645-T; Amendment 39-22610; AD 2023-23-08] • RIN 2120-AA64 ( printed page 83813) AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule. SUMMARY: The FAA is superseding Airworthiness Directive (AD) 2019-07-05, which applied to all Airbus SAS Model A318 series airplanes; Model A319-111, -112, -113, -114, -115, -131, -132, and -133 airplanes; Model A320-211, -212, -214, -216, -231, -232, and -233 airplanes; and Model A321-111, -112, -131, -211, -212, -213, -231, and -232 airplanes. AD 2019-07-05 required repetitive inspections for cracking of the 10VU rack fitting lugs and repair of any cracking. This AD continues to require the requirements of AD 2019-07-05, with reduced compliance times and removes airplanes having a certain modification from the applicability. This AD was prompted by a determination that certain repetitive inspection intervals need to be revised. The FAA is issuing this AD to address the unsafe condition on these products. DATES: This AD is effective January 5, 2024. The Director of the Federal Register approved the incorporation by reference of certain publications listed in this AD as of January 5, 2024. ADDRESSES: AD Docket: You may examine the AD docket at regulations.gov under Docket No. FAA-2023-1409; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, the mandatory continuing airworthiness information (MCAI), any comments received, and other information. The address for Docket Operations is U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590. Material Incorporated by Reference: • For service information identified in this final rule, contact Airbus SAS, Airworthiness Office—EIAS, Rond-Point Emile Dewoitine No: 2, 31700 Blagnac Cedex, France; telephone +33 5 61 93 36 96; fax +33 5 61 93 44 51; emailaccount.airworth-eas@airbus.com; website airbus.com. • You may view this service information at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195. It is also available atregulations.gov under Docket No. FAA-2023-1409. FOR FURTHER INFORMATION CONTACT: Timothy Dowling, Aviation Safety Engineer, FAA, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; telephone 206-231-3667; email Timothy.P.Dowling@faa.gov. SUPPLEMENTARY INFORMATION: Background The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 to supersede AD 2019-07-05, Amendment 39-19616 (84 FR 16386, April 19, 2019; corrected May 10, 2019 (84 FR 20542)) (AD 2019-07-05). AD 2019-07-05 applied to all Airbus SAS Model A318 series airplanes; Model A319-111, -112, -113, -114, -115, -131, -132, and -133 airplanes; Model A320-211, -212, -214, -216, -231, -232, and -233 airplanes; and Model A321-111, -112,…

Fonte: Federal Register (federalregister.gov). Texto original em inglês. Conteúdo sanitizado por segurança.