- AeroCopilot
- /
- Diretivas de Aeronavegabilidade
- /
- 2023-19162
2023-19162
Airworthiness Directives; BRP-Rotax GmbH & Co KG (Formerly BRP-POWERTRAIN GMBH & CO KG and Bombardier-Rotax GmbH) Engines and Various Aircraft
Resumo Rápido
- Número AD
- 2023-19162
- Autoridade
- FAA
- Data de emissão
- 05/09/2023
- Data efetiva
- 20/09/2023
- Criticidade
- routine
Autoridade
Federal Aviation Administration (EUA)
Data de Publicação
05 de setembro de 2023
Data Efetiva
20 de setembro de 2023
Prazo de Cumprimento
Antes do próximo voo
Resumo da Diretiva
A FAA está adotando uma nova Diretiva de Aeronavegabilidade (AD) para todos os motores BRP-Rotax GmbH & Co KG (Rotax) Modelos 912 F2, 912 F3, 912 F4, 912 iSc2 Sport, 912 iSc3 Sport, 912 S2, 912 S3, 912 S4, 914 F2, 914 F3 e 914 F4; e motores Modelos 912 A, 912 A2 e 912 A3 incluídos como parte do projeto de tipo certificado para várias aeronaves. Esta AD foi originada por relato de anomalias de superfície no comando da hélice afetado, que poderia conduzir ao desgaste aumentado dos mancais do comando da hélice. Esta AD exige inspeções iniciais e repetitivas do tampão magnético para acumulação de partículas metálicas a fim de avaliar a condição da caixa de engrenagens da hélice quanto ao desgaste dos mancais do comando da hélice e remoção do comando da hélice afetado do serviço e substituição por uma peça elegível para instalação como ação de término, imediatamente ou em um período de tempo determinado dependendo dos achados da inspeção. Esta AD também proíbe a instalação do comando da hélice afetado em qualquer motor. A FAA está emitindo esta AD para abordar a condição insegura nesses produtos.
The FAA is adopting a new airworthiness directive (AD) for all BRP-Rotax GmbH & Co KG (Rotax) Model 912 F2, 912 F3, 912 F4, 912 iSc2 Sport, 912 iSc3 Sport, 912 S2, 912 S3, 912 S4, 914 F2, 914 F3, and 914 F4 engines; and Model 912 A, 912 A2, and 912 A3 engines included as part of the type certificated aircraft type design for various aircraft. This AD was prompted by a report of surface abnormalities on the affected propeller shaft, which could lead to increased wear of the propeller shaft bearings. This AD requires initial and repetitive inspections of the magnetic plug for the accumulation of metal chips to assess the condition of the propeller gearbox for wear of the propeller shaft bearings and removal of the affected propeller shaft from service and replacement with a part eligible for installation as a terminating action either immediately or at a certain time depending on inspection findings. This AD also prohibits installation of the affected propeller shaft on any engine. The FAA is issuing this AD to address the unsafe condition on these products.Texto Completo da Diretiva
Expandir texto completo (Federal Register)Texto completo (Federal Register)
Document Headings Document headings vary by document type but may contain the following: • the agency or agencies that issued and signed a document • the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to • the agency docket number / agency internal file number • the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Transportation Federal Aviation Administration • 14 CFR Part 39 • [Docket No. FAA-2023-1809; Project Identifier MCAI-2023-00945-E; Amendment 39-22539; AD 2023-17-13] • RIN 2120-AA64 AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule; request for comments. SUMMARY: The FAA is adopting a new airworthiness directive (AD) for all BRP-Rotax GmbH & Co KG (Rotax) Model 912 F2, 912 F3, 912 F4, 912 iSc2 Sport, 912 iSc3 Sport, 912 S2, 912 S3, 912 S4, 914 F2, 914 F3, and 914 F4 engines; and Model 912 A, 912 A2, and 912 A3 engines included as part of the type certificated aircraft type design for various aircraft. This AD was prompted by a report of surface abnormalities on the affected propeller shaft, which could lead to increased wear of the propeller shaft bearings. This AD requires initial and repetitive inspections of the magnetic plug for the accumulation of metal chips to assess the condition of the propeller gearbox for wear of the propeller shaft bearings and removal of the affected propeller shaft from service and replacement with a part eligible for installation as a terminating action either immediately or at a certain time depending on inspection findings. This AD also prohibits installation of the affected propeller shaft on any engine. The FAA is issuing this AD to address the unsafe condition on these products. DATES: This AD is effective September 20, 2023. The Director of the Federal Register approved the incorporation by reference of certain publications listed in this AD as of September 20, 2023. The FAA must receive comments on this AD by October 20, 2023. ADDRESSES: You may send comments, using the procedures found in 14 CFR 11.43 and 11.45, by any of the following methods: • Federal eRulemaking Portal: Go to regulations.gov. Follow the instructions for submitting comments. • Fax: (202) 493-2251. • Mail: U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room ( printed page 60571) W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590. • Hand Delivery: Deliver to Mail address above between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. AD Docket: You may examine the AD docket at regulations.gov under Docket No. FAA-2023-1809; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, the mandatory continuing airworthiness information (MCAI), any comments received, and other information. The street address for Docket Operations is listed above. Material Incorporated by Reference: • For service information identified in this final rule, contact BRP-Rotax GmbH & Co KG, Rotaxstrasse 1, A-4623 Gunskirchen, Austria; phone: +43 7246 601 0; website:flyrotax.com. • You may view this service information at the FAA Airworthiness Products Section, Operational Safety Branch, 1200 District Avenue, Burlington, MA 01803. For information on the availability of this material at the FAA, call (817) 222-5110. It is also avai…
Fonte: Federal Register (federalregister.gov). Texto original em inglês. Conteúdo sanitizado por segurança.
Documentos e Referências
Monitore DAs automaticamente para sua aeronave
Cadastre sua aeronave no AeroCopilot e receba alertas por e-mail e notificação quando novas diretivas de aeronavegabilidade afetarem seu tipo de aeronave.
Dados obtidos do Federal Register (federalregister.gov). As informações são fornecidas para fins de consulta — consulte sempre a fonte oficial para fins de compliance regulatório.