- AeroCopilot
- /
- Diretivas de Aeronavegabilidade
- /
- 2023-07738
2023-07738
Airworthiness Directives; Bombardier, Inc. Airplanes
Resumo Rápido
- Número AD
- 2023-07738
- Autoridade
- FAA
- Data de emissão
- 13/04/2023
- Data efetiva
- 18/05/2023
- Criticidade
- routine
Autoridade
Federal Aviation Administration (EUA)
Data de Publicação
13 de abril de 2023
Data Efetiva
18 de maio de 2023
Prazo de Cumprimento
Antes do próximo voo
Resumo da Diretiva
A FAA está adotando uma nova diretiva de aeronavegabilidade (DA) para todos os aviões Bombardier, Inc., Modelo CL-600-1A11 (600), CL-600-2A12 (601) e CL-600-2B16 (601-3A, 601-3R e variantes 604). Esta DA foi motivada pela constatação de que, devido à falta de conscientização da tripulação de voo, capuzes de fumaça com um número de peça específico instalados em vários locais do avião poderiam ser confundidos com equipamento de proteção respiratória (EPR). Esta DA exige uma inspeção ou revisão de registros para determinar se algum capuz de fumaça com um número de peça específico está instalado em qualquer local do avião e, dependendo dos resultados, remover o capuz de fumaça e os placares associados e instalar novos placares. A FAA está emitindo esta DA para corrigir a condição insegura destes produtos.
The FAA is adopting a new airworthiness directive (AD) for all Bombardier, Inc., Model CL-600-1A11 (600), CL-600-2A12 (601), and CL- 600-2B16 (601-3A, 601-3R, and 604 Variants) airplanes. This AD was prompted by a determination that, due to a lack of flightcrew awareness, smoke hoods with a certain part number installed throughout the airplane could be mistaken for protective breathing equipment (PBE). This AD requires an inspection or records review to determine if any smoke hood with a certain part number is installed in any location on the airplane and, depending on the results, removing the smoke hood and associated placards and installing new placards. The FAA is issuing this AD to address the unsafe condition on these products.Texto Completo da Diretiva
Expandir texto completo (Federal Register)Texto completo (Federal Register)
Document Headings Document headings vary by document type but may contain the following: • the agency or agencies that issued and signed a document • the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to • the agency docket number / agency internal file number • the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Transportation Federal Aviation Administration • 14 CFR Part 39 • [Docket No. FAA-2022-1572; Project Identifier MCAI-2022-00350-T; Amendment 39-22388; AD 2023-06-02] • RIN 2120-AA64 ( printed page 22355) AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule. SUMMARY: The FAA is adopting a new airworthiness directive (AD) for all Bombardier, Inc., Model CL-600-1A11 (600), CL-600-2A12 (601), and CL-600-2B16 (601-3A, 601-3R, and 604 Variants) airplanes. This AD was prompted by a determination that, due to a lack of flightcrew awareness, smoke hoods with a certain part number installed throughout the airplane could be mistaken for protective breathing equipment (PBE). This AD requires an inspection or records review to determine if any smoke hood with a certain part number is installed in any location on the airplane and, depending on the results, removing the smoke hood and associated placards and installing new placards. The FAA is issuing this AD to address the unsafe condition on these products. DATES: This AD is effective May 18, 2023. The Director of the Federal Register approved the incorporation by reference of certain publications listed in this AD as of May 18, 2023. ADDRESSES: AD Docket: You may examine the AD docket at regulations.gov under Docket No. FAA-2022-1572; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, the mandatory continuing airworthiness information (MCAI), any comments received, and other information. The address for Docket Operations is U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590. Material Incorporated by Reference: • For service information identified in this final rule, contact Bombardier Business Aircraft Customer Response Center, 400 Côte-Vertu Road West, Dorval, Québec H4S 1Y9, Canada; telephone 514-855-2999; emailac.yul@aero.bombardier.com; website: bombardier.com. • You may view this service information at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th Street, Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195. It is also available atregulations.gov under Docket No. FAA-2022-1572. FOR FURTHER INFORMATION CONTACT: Chirayu Gupta, Aerospace Engineer, Mechanical Systems and Administrative Services Section, FAA, New York ACO Branch, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; telephone 516-228-7300; email 9-avs-nyaco-cos@faa.gov. SUPPLEMENTARY INFORMATION: Background The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to all Bombardier, Inc., Model CL-600-1A11 (600), CL-600-2A12 (601), and CL-600-2B16 (601-3A, 601-3R, and 604 Variants) airplanes. The NPRM published in the Federal Register on December 6, 2022 (87 FR 74535). The NPRM was prompted by AD CF-2022-10, dated March 1…
Fonte: Federal Register (federalregister.gov). Texto original em inglês. Conteúdo sanitizado por segurança.
Documentos e Referências
Monitore DAs automaticamente para sua aeronave
Cadastre sua aeronave no AeroCopilot e receba alertas por e-mail e notificação quando novas diretivas de aeronavegabilidade afetarem seu tipo de aeronave.
Dados obtidos do Federal Register (federalregister.gov). As informações são fornecidas para fins de consulta — consulte sempre a fonte oficial para fins de compliance regulatório.