2022-15131

Document Headings Document headings vary by document type but may contain the following: • the agency or agencies that issued and signed a document • the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to • the agency docket number / agency internal file number • the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Transportation Federal Aviation Administration • 14 CFR Part 39 • [Docket No. FAA-2022-0384; Project Identifier AD-2022-00027-E; Amendment 39-22122; AD 2022-15-03] • RIN 2120-AA64 AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule. SUMMARY: The FAA is superseding Airworthiness Directive (AD) 2021-14-06 for all Pratt & Whitney (PW) PW1519G, PW1521G, PW1521G-3, PW1521GA, PW1524G, PW1524G-3, PW1525G, PW1525G-3, PW1919G, PW1921G, PW1922G, PW1923G, and PW1923G-A model turbofan engines. AD 2021-14-06 required repetitive borescope inspections (BSI) of certain low-pressure compressor (LPC) rotor 1 (R1) until replacement of electronic engine control (EEC) full authority digital electronic control (FADEC) software with updated software. AD 2021-14-06 also required a BSI after installation of the updated EEC FADEC software if certain Onboard Maintenance Message fault codes are displayed and meet specified criteria. AD 2021-14-06 also required, depending on the results of the BSI, replacement of the LPC R1. Since the FAA issued AD 2021-14-06, the manufacturer redesigned the compressor intermediate case (CIC) assembly to incorporate a shortened bleed duct configuration and updated the EEC FADEC software. This AD continues to require repetitive BSI of certain LPC R1s until replacement of EEC FADEC software with updated software and also a BSI after installation of the updated EEC FADEC software if certain Onboard Maintenance Message fault codes are displayed and meet specified criteria. This AD continues to require, depending on the results of the BSI, replacement of the LPC R1. This AD also requires removal and replacement of the existing CIC assembly with a CIC assembly eligible for installation. The FAA is issuing this AD to address the unsafe condition on these products. DATES: This AD is effective August 19, 2022. ADDRESSES: For service information identified in this final rule, contact Pratt & Whitney, 400 Main Street, East Hartford, CT 06118; phone: (800) 565-0140; email: help24@pw.utc.com; website: http://fleetcare.pw.utc.com. You may view this service information at the Airworthiness Products Section, FAA, 1200 District Avenue, Burlington, MA 01803. For information on the availability of this material at the FAA, call (817) 222-5110. Examining the AD Docket You may examine the AD docket at https://www.regulations.gov by searching for and locating Docket No. FAA-2022-0384; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, any comments received, and other information. The address for ( printed page 42309) Docket Operations is U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590. FOR FURTHER INFORMATION CONTACT: Mark Taylor, Aviation Safety Engineer, ECO Branch, FAA, 1200 District Avenue, Burlington, MA 01803; phone: (781) 238-7229; email: Mark.Taylor@faa.gov. SUPPLEMENTARY INFORMATION: Background The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 to supersede AD 2021-14-06, Amendment 39-21633 (86 FR 36061, July 8, 2021), (AD 2021-14-06)…

Fonte: Federal Register (federalregister.gov). Texto original em inglês. Conteúdo sanitizado por segurança.