- AeroCopilot
- /
- Diretivas de Aeronavegabilidade
- /
- 2022-12969
2022-12969
Airworthiness Directives; Cameron Balloons Ltd. Fuel Cylinders
Resumo Rápido
- Número AD
- 2022-12969
- Autoridade
- FAA
- Data de emissão
- 15/06/2022
- Data efetiva
- 30/06/2022
- Criticidade
- routine
Autoridade
Federal Aviation Administration (EUA)
Data de Publicação
15 de junho de 2022
Data Efetiva
30 de junho de 2022
Prazo de Cumprimento
Antes do próximo voo
Resumo da Diretiva
A FAA está adotando uma nova diretiva de aeronavegabilidade (AD) para certos cilindros de combustível Cameron Balloons Ltd. (Cameron) instalados em balões de ar quente. Esta AD resulta de informação obrigatória de aeronavegabilidade contínua (MCAI) originada por uma autoridade aeronáutica de outro país para identificar e corrigir uma condição insegura em um produto aeronáutico. A MCAI identifica a condição insegura como trincas na solda entre a placa da válvula do cilindro e a extremidade cônica superior do cilindro de combustível Cameron número de peça (P/N) CB2990 (Alugas), que poderiam permitir vazamento incontrolado de combustível líquido de propano. Esta AD exige a remoção de qualquer cilindro de combustível P/N CB2990 (Alugas) instalado do serviço antes de qualquer voo adicional. A FAA está emitindo esta AD para abordar a condição insegura nesses produtos.
The FAA is adopting a new airworthiness directive (AD) for certain Cameron Balloons Ltd. (Cameron) fuel cylinders installed on hot air balloons. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI identifies the unsafe condition as cracks in the weld between the cylinder valve plate and the upper dished end of Cameron part number (P/N) CB2990 (Alugas) fuel cylinders, which could allow uncontrolled fuel leakage of liquid propane. This AD requires the removal of any installed P/N CB2990 (Alugas) fuel cylinder from service before further flight. The FAA is issuing this AD to address the unsafe condition on these products.Texto Completo da Diretiva
Expandir texto completo (Federal Register)Texto completo (Federal Register)
Document Headings Document headings vary by document type but may contain the following: • the agency or agencies that issued and signed a document • the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to • the agency docket number / agency internal file number • the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Transportation Federal Aviation Administration • 14 CFR Part 39 • [Docket No. FAA-2022-0683; Project Identifier MCAI-2022-00631-Q; Amendment 39-22089; AD 2022-13-03] • RIN 2120-AA64 AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule; request for comments. SUMMARY: The FAA is adopting a new airworthiness directive (AD) for certain Cameron Balloons Ltd. (Cameron) fuel cylinders installed on hot air balloons. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI identifies the unsafe condition as cracks in the weld between the cylinder valve plate and the upper dished end of Cameron part number (P/N) CB2990 (Alugas) fuel cylinders, which could allow uncontrolled fuel leakage of liquid propane. This AD requires the removal of any installed P/N CB2990 (Alugas) fuel cylinder from service before further flight. The FAA is issuing this AD to address the unsafe condition on these products. DATES: This AD is effective June 30, 2022. The FAA must receive comments on this AD by August 1, 2022. ADDRESSES: You may send comments, using the procedures found in 14 CFR 11.43 and 11.45, by any of the following methods: • Federal eRulemaking Portal: Go to https://www.regulations.gov. Follow the instructions for submitting comments. • Fax: (202) 493-2251. • Mail: U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590. • Hand Delivery: Deliver to Mail address above between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. For service information identified in this final rule, contact Cameron Balloons Ltd., St Johns Street, Bedminster, Bristol, BS3 4NH, United Kingdom; phone: +44 0 117 9637216; email: technical@cameronballoons.co.uk; website: www.cameronballoons.co.uk. You may view this service information at the FAA, Airworthiness Products Section, Operational Safety Branch, 901 Locust, Kansas City, MO 64106. For information on the availability of this material at the FAA, call (817) 222-5110. Examining the AD Docket You may examine the AD docket at https://www.regulations.gov by searching for and locating Docket No. FAA-2022-0683; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, the MCAI, any comments received, and other information. The street address for the Docket Operations is listed above. FOR FURTHER INFORMATION CONTACT: Mike Kiesov, Aviation Safety Engineer, FAA, General Aviation & Rotorcraft Section, International Validation Branch, 901 Locust, Room 301, Kansas City, MO 64106; phone: (816) 329-4144; email: mike.kiesov@faa.gov. SUPPLEMENTARY INFORMATION: Background The Civil Aviation Authority (CAA), …
Fonte: Federal Register (federalregister.gov). Texto original em inglês. Conteúdo sanitizado por segurança.
Documentos e Referências
Monitore DAs automaticamente para sua aeronave
Cadastre sua aeronave no AeroCopilot e receba alertas por e-mail e notificação quando novas diretivas de aeronavegabilidade afetarem seu tipo de aeronave.
Dados obtidos do Federal Register (federalregister.gov). As informações são fornecidas para fins de consulta — consulte sempre a fonte oficial para fins de compliance regulatório.