- AeroCopilot
- /
- Diretivas de Aeronavegabilidade
- /
- 2022-07263
2022-07263
Airworthiness Directives; Leonardo S.p.a. Helicopters
Resumo Rápido
- Número AD
- 2022-07263
- Autoridade
- FAA
- Data de emissão
- 06/04/2022
- Data efetiva
- 11/05/2022
- Criticidade
- routine
Autoridade
Federal Aviation Administration (EUA)
Data de Publicação
06 de abril de 2022
Data Efetiva
11 de maio de 2022
Prazo de Cumprimento
Antes do próximo voo
Resumo da Diretiva
A FAA está adotando uma nova Diretiva de Aeronavegabilidade (AD) para todos os helicópteros Modelo AW109SP da Leonardo S.p.a. Esta AD foi motivada por relatos de corrosão no interior do conjunto de suporte do guindaste (conjunto de lança) (peça afetada) que afeta tanto os espigões dos parafusos huck (fixadores de parafusos cegos) quanto a superfície de suporte. Esta AD requer inspeções repetitivas das superfícies externas e internas de cada peça afetada quanto a trincas e corrosão e, dependendo dos achados, a execução de ações corretivas, conforme especificado em uma AD da Agência Europeia de Segurança da Aviação (EASA), que é incorporada por referência. A FAA está emitindo esta AD para abordar a condição insegura nestes produtos.
The FAA is adopting a new airworthiness directive (AD) for all Leonardo S.p.a. Model AW109SP helicopters. This AD was prompted by reports of corrosion inside the hoist support assembly (boom assembly) (affected part) that affects both the huck bolt heads (blind bolt fasteners) and the support surface. This AD requires repetitive inspections of the external and internal surfaces of each affected part for cracking and corrosion and, depending on the findings, accomplishment of corrective actions, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.Texto Completo da Diretiva
Expandir texto completo (Federal Register)Texto completo (Federal Register)
Document Headings Document headings vary by document type but may contain the following: • the agency or agencies that issued and signed a document • the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to • the agency docket number / agency internal file number • the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Transportation Federal Aviation Administration • 14 CFR Part 39 • [Docket No. FAA-2022-0008; Project Identifier MCAI-2021-00882-R; Amendment 39-21985; AD 2022-06-19] • RIN 2120-AA64 AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule. SUMMARY: The FAA is adopting a new airworthiness directive (AD) for all Leonardo S.p.a. Model AW109SP helicopters. This AD was prompted by reports of corrosion inside the hoist support assembly (boom assembly) (affected part) that affects both the huck bolt heads (blind bolt fasteners) and the support surface. This AD requires repetitive inspections of the external and internal surfaces of each affected part for cracking and corrosion and, depending on the findings, accomplishment of corrective actions, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products. DATES: This AD is effective May 11, 2022. The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of May 11, 2022. ADDRESSES: For EASA material incorporated by reference (IBR) in this final rule, contact EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; telephone +49 221 8999 000; email ADs@easa.europa.eu; internet www.easa.europa.eu. You may find the EASA material on the EASA website at https://ad.easa.europa.eu. You may view this material at the FAA, Office of the Regional Counsel, Southwest Region, 10101 Hillwood Pkwy., Room 6N-321, Fort Worth, TX 76177. For information on the availability of this material at the FAA, call (817) 222-5110. It is also available in the AD docket at https://www.regulations.gov by searching for and locating Docket No. FAA-2022-0008. Examining the AD Docket You may examine the AD docket at https://www.regulations.gov by searching for and locating Docket No. FAA-2022-0008; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, the EASA AD, any comments received, and other information. The address for Docket Operations is U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590. FOR FURTHER INFORMATION CONTACT: Andrea Jimenez, Aerospace Engineer, COS Program Management Section, Operational Safety Branch, Compliance & Airworthiness Division, FAA, 1600 Stewart Ave., Suite 410, Westbury, NY 11590; telephone (516) 228-7330; email andrea.jimenez@faa.gov. SUPPLEMENTARY INFORMATION: Background EASA, which is the Technical Agent for the Member States of the European Union, has issued EASA AD 2021-0179, dated July 27, 2021 (EASA AD 2021-0179), to correct an unsafe condition for Leonardo S.p.A. Helicopters, formerly Finmeccanica S.p.A., AgustaWestland S.p.A., and Agusta S.p.A., Model AW109SP helicopters, all serial numbers. The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to all Leonardo S.p.a. Model AW109SP helicopters. The NPRM published in the …
Fonte: Federal Register (federalregister.gov). Texto original em inglês. Conteúdo sanitizado por segurança.
Documentos e Referências
Monitore DAs automaticamente para sua aeronave
Cadastre sua aeronave no AeroCopilot e receba alertas por e-mail e notificação quando novas diretivas de aeronavegabilidade afetarem seu tipo de aeronave.
Dados obtidos do Federal Register (federalregister.gov). As informações são fornecidas para fins de consulta — consulte sempre a fonte oficial para fins de compliance regulatório.