2022-06171

Document Headings Document headings vary by document type but may contain the following: • the agency or agencies that issued and signed a document • the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to • the agency docket number / agency internal file number • the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Transportation Federal Aviation Administration • 14 CFR Part 25 • [Docket No. FAA-2014-1076; Special Conditions No. 25-607A-SC] AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final special conditions; amendment. SUMMARY: These special conditions are issued for the Dassault Aviation (Dassault) Model Falcon 6X airplane. This airplane will have a novel or unusual design feature when compared to the state of technology envisioned in the airworthiness standards for transport-category airplanes. This airplane is equipped with an electronic flight-control system that includes pilot controls through a side stick instead of through a conventional wheel or control stick. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards. DATES: This action is effective on Dassault on March 23, 2022. FOR FURTHER INFORMATION CONTACT: Todd Martin, Materials and Structural Properties Section, AIR-621, Technical Innovation Policy Branch, Policy and Innovation Division, Aircraft Certification Service, Federal Aviation Administration, 2200 South 216th Street, Des Moines, Washington 98198; telephone and fax 206-231-3210; email todd.martin@faa.gov. SUPPLEMENTARY INFORMATION: Background On July 1, 2012, Dassault Aviation applied for a type certificate for their new Model Falcon 5X airplane. Special conditions were issued for that design on January 27, 2016 (81 FR 4579). However, Dassault has decided not to release an airplane under the model designation Falcon 5X, instead choosing to change that model designation to Falcon 6X. In February of 2018, due to engine supplier issues, Dassault extended the type certificate application date for their Model Falcon 5X airplane under new Model Falcon 6X. This amendment to the original special conditions reflects the model-name change. This airplane is a twin-engine business jet with seating for 19 passengers and a maximum takeoff weight of 77,460 pounds. The Dassault Model Falcon 6X airplane design remains unchanged from the Model Falcon 5X in all material respects other than different engines. Type Certification Basis Under the provisions of 14 CFR 21.17, Dassault must show that the Model Falcon 6X airplane meets the applicable provisions of part 25, as amended by Amendments 25-1 through 25-146. If the Administrator finds that the applicable airworthiness regulations ( i.e.,14 CFR part 25) do not contain adequate or appropriate safety standards for the Dassault Model Falcon 6X airplane because of a novel or unusual design feature, special conditions are prescribed under the provisions of § 21.16. Special conditions are initially applicable to the model for which they are issued. Should the type certificate for that model be amended later to include any other model that incorporates the same novel or unusual design feature, these special conditions would also apply to the other model under § 21.101. In addition to the applicable airworthiness regulations and special conditions, the Dassault Model Falcon 6X airplane must comply with the fuel-vent and exhaust-emission requirements of 14 CFR part 34, and the noise-certification requirements of 14 CFR part 36. …

Fonte: Federal Register (federalregister.gov). Texto original em inglês. Conteúdo sanitizado por segurança.