2021-13124

Document Headings Document headings vary by document type but may contain the following: • the agency or agencies that issued and signed a document • the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to • the agency docket number / agency internal file number • the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Transportation Federal Aviation Administration • 14 CFR Part 39 • [Docket No. FAA-2020-1028; Project Identifier AD-2020-00978-T; Amendment 39-21599; AD 2021-12-12] • RIN 2120-AA64 AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule. SUMMARY: The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 717-200 airplanes. This AD was prompted by a report of discrepant spoiler assemblies, which have the wrong splice bar installed and lack reinforcing doublers, and by reports that some splice bars were shipped for installation on Model 717-200 airplanes, although they were not eligible for installation on Model 717-200 airplanes and were identified incorrectly with the Model 717-200 splice bar part number. This AD requires a one-time inspection of the left- and right-wing inboard and outboard spoiler assemblies, for the correct configuration of the splice bar and doublers, and repair or replacement if necessary. The FAA is issuing this AD to address the unsafe condition on these products. DATES: This AD is effective July 29, 2021. The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of July 29, 2021. ADDRESSES: For service information identified in this final rule, contact Boeing Commercial Airplanes, Attention: Contractual & Data Services (C&DS), 2600 Westminster Blvd., MC 110-SK57, Seal Beach, CA 90740-5600; telephone 562-797-1717; internet https://www.myboeingfleet.com. You may view this service information at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195. It is also available at https://www.regulations.gov by searching for and locating Docket No. FAA-2020-1028. Examining the AD Docket You may examine the AD docket at https://www.regulations.gov by searching for and locating Docket No. FAA-2020-1028; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, any comments received, and other information. The address for Docket Operations is U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590. FOR FURTHER INFORMATION CONTACT: Mohit Garg, Aerospace Engineer, Airframe Section, FAA, Los Angeles ACO Branch, 3960 Paramount Boulevard, Lakewood, CA 90712-4137; phone: 562-627-5264; fax: 562-627-5210; email: mohit.garg@faa.gov. SUPPLEMENTARY INFORMATION: Background The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to all The Boeing Company Model 717-200 airplanes. The NPRM published in the Federal Register on December 29, 2020 (85 FR 85559). The NPRM was prompted by a report of discrepant spoiler assemblies, which have the wrong splice bar installed and lack reinforcing doublers, and by reports that some splice bars were shipped for installation on Model 717-200 airplanes, although they were not eligible for installation on Model 717-200 airplanes and were identified incorrectly with the Model…

Fonte: Federal Register (federalregister.gov). Texto original em inglês. Conteúdo sanitizado por segurança.