2021-08055

Document Headings Document headings vary by document type but may contain the following: • the agency or agencies that issued and signed a document • the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to • the agency docket number / agency internal file number • the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Transportation Federal Aviation Administration • 14 CFR Part 39 • [Docket No. FAA-2020-1167; Project Identifier AD-2020-01007-T; Amendment 39-21504; AD 2021-08-10] • RIN 2120-AA64 AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule. SUMMARY: The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model DC-10-10, DC-10-10F, DC-10-15, DC-10-30, DC-10-30F (KC-10A and KDC-10), DC-10-40 ( printed page 20449) and DC-10-40F airplanes; and Model MD-10-10F and MD-10-30F airplanes. This AD was prompted by a report that an operator found a crack in the upper flange of the pylon aft bulkhead bracket. This AD requires a general visual inspection of the left and right wing pylon at the aft bulkhead bracket for any lockbolt and collar; repetitive surface and open hole eddy current high frequency (ETHF) inspections of the left and right wing pylon at the aft bulkhead bracket for any cracking; and applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products. DATES: This AD is effective May 25, 2021. The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of May 25, 2021. ADDRESSES: For service information identified in this final rule, contact Boeing Commercial Airplanes, Attention: Contractual & Data Services (C&DS), 2600 Westminster Blvd., MC 110-SK57, Seal Beach, CA 90740-5600; telephone 562-797-1717; internet https://www.myboeingfleet.com. You may view this service information at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195. It is also available at https://www.regulations.gov by searching for and locating Docket No. FAA-2020-1167. Examining the AD Docket You may examine the AD docket at https://www.regulations.gov by searching for and locating Docket No. FAA-2020-1167; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, any comments received, and other information. The address for Docket Operations is U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590. FOR FURTHER INFORMATION CONTACT: Manuel Hernandez, Aerospace Engineer, Airframe Section, FAA, Los Angeles ACO Branch, 3960 Paramount Boulevard, Lakewood, CA 90712-4137; phone: 562-627-5256; fax: 562-627-5210; email: Manuel.F.Hernandez@faa.gov. SUPPLEMENTARY INFORMATION: Background The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to all The Boeing Company Model DC-10-10, DC-10-10F, DC-10-15, DC-10-30, DC-10-30F (KC-10A and KDC-10), DC-10-40 and DC-10-40F airplanes; and Model MD-10-10F and MD-10-30F airplanes. The NPRM published in the Federal Register on January 15, 2021 (86 FR 3885). The NPRM was prompted by a report that an operator found a crack in the upper flange of the pylon aft bu…

Fonte: Federal Register (federalregister.gov). Texto original em inglês. Conteúdo sanitizado por segurança.