2021-07034

Document Headings Document headings vary by document type but may contain the following: • the agency or agencies that issued and signed a document • the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to • the agency docket number / agency internal file number • the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Transportation Federal Aviation Administration • 14 CFR Part 39 • [Docket No. FAA-2020-0848; Product Identifier 2020-NM-088-AD; Amendment 39-21486; AD 2021-07-09] • RIN 2120-AA64 AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule. SUMMARY: The FAA is superseding Airworthiness Directive (AD) 2007-07-03, which applied to certain The Boeing Company Model 747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400, 747-400D, 747-400F, 747SR, and 747SP series airplanes. AD 2007-07-03 required repetitive tests to detect hot air leaking from the trim air diffuser ducts or sidewall riser duct assemblies (collectively referred to as TADDs), related investigative actions, and corrective actions if necessary. AD 2007-07-03 also provided an optional terminating action for the repetitive tests. This AD requires repetitive inspections of all TADD material for damage and applicable on-condition actions. This AD was prompted by reports that high temperature composite material TADDs installed as specified in AD 2007-07-03 have also failed. The FAA is issuing this AD to address the unsafe condition on these products. DATES: This AD is effective May 12, 2021. The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of May 12, 2021. ADDRESSES: For service information identified in this final rule, contact Boeing Commercial Airplanes, Attention: Contractual & Data Services (C&DS), 2600 Westminster Blvd., MC 110-SK57, Seal Beach, CA 90740-5600; telephone 562-797-1717; internet https://www.myboeingfleet.com. You may view this service information at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195. It is also available on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA-2020-0848. Examining the AD Docket You may examine the AD docket on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA-2020-0848; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, any comments received, and other information. The address for Docket Operations is U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590. FOR FURTHER INFORMATION CONTACT: Nicole S. Tsang, Aerospace Engineer, Cabin Safety and Environmental Systems Section, FAA, Seattle ACO Branch, 2200 South 216th St., Des Moines, WA 98198; phone and fax: 206-231-3959; email: nicole.s.tsang@faa.gov. SUPPLEMENTARY INFORMATION: Discussion The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 to supersede AD 2007-07-03, Amendment 39-15003 (72 FR 14395, March 28, 2007) (AD 2007-07-03). AD 2007-07-03 applied to certain The Boeing Company Model 747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400, 747-400D, 747-400F, 747SR, and 747SP series airplanes. The NPRM published in the Federal Register on September 2…

Fonte: Federal Register (federalregister.gov). Texto original em inglês. Conteúdo sanitizado por segurança.