- AeroCopilot
- /
- Diretivas de Aeronavegabilidade
- /
- 2020-27897
2020-27897
Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG (Type Certificate Previously Held by Rolls-Royce plc) Turbofan Engines
Resumo Rápido
- Número AD
- 2020-27897
- Autoridade
- FAA
- Data de emissão
- 18/12/2020
- Data efetiva
- 04/01/2021
- Criticidade
- routine
Autoridade
Federal Aviation Administration (EUA)
Data de Publicação
18 de dezembro de 2020
Data Efetiva
04 de janeiro de 2021
Prazo de Cumprimento
Antes do próximo voo
Resumo da Diretiva
A FAA está adotando uma nova diretriz de aeronavegabilidade (AD) para certos motores turbofan Rolls-Royce Deutschland Ltd & Co KG (Certificado de Tipo anteriormente mantido por Rolls-Royce plc) (RRD) RB211 Trent 768-60, 772-60, 772B-60 e 772C-60. Esta AD exige a substituição de palhetas da turbina de alta pressão (HPT) por peças elegíveis para instalação antes de exceder os ciclos de voo especificados desde novo. Esta AD foi motivada por diversos relatórios do fabricante indicando que palhetas HPT em motores turbofan RB211 Trent 700 têm sido sujeitas a altos níveis de corrosão por fadiga, levando a trincas nas palhetas e eventual liberação, resultando em decolagem abortada e desligamentos em voo. A FAA está emitindo esta AD para abordar a condição insegura destes produtos.
The FAA is adopting a new airworthiness directive (AD) for certain Rolls-Royce Deutschland Ltd & Co KG (Type Certificate Previously Held by Rolls-Royce plc) (RRD) RB211 Trent 768-60, 772-60, 772B-60 and 772C-60 model turbofan engines. This AD requires replacement of high-pressure turbine (HPT) blades with parts eligible for installation before exceeding specified flight cycles since new. This AD was prompted by several reports from the manufacturer that HPT blades on RB211 Trent 700 model turbofan engines have been subject to high levels of corrosion fatigue, leading to blade cracking and eventual release, resulting in an aborted take-off and in-flight shut- downs. The FAA is issuing this AD to address the unsafe condition on these products.Texto Completo da Diretiva
Expandir texto completo (Federal Register)Texto completo (Federal Register)
Document Headings Document headings vary by document type but may contain the following: • the agency or agencies that issued and signed a document • the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to • the agency docket number / agency internal file number • the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Transportation Federal Aviation Administration • 14 CFR Part 39 • [Docket No. FAA-2020-1032; Project Identifier MCAI-2020-00856-E; Amendment 39-21338; AD 2020-24-08] • RIN 2120-AA64 AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule; request for comments. SUMMARY: The FAA is adopting a new airworthiness directive (AD) for certain Rolls-Royce Deutschland Ltd & Co KG (Type Certificate Previously Held by Rolls-Royce plc) (RRD) RB211 Trent 768-60, 772-60, 772B-60 and 772C-60 model turbofan engines. This AD requires replacement of high-pressure turbine (HPT) blades with parts eligible for installation before exceeding specified flight cycles since new. This AD was prompted by several reports from the manufacturer that HPT blades on RB211 Trent 700 model turbofan engines have been subject to high levels of corrosion fatigue, leading to blade cracking and eventual release, resulting in an aborted take-off and in-flight shut-downs. The FAA is issuing this AD to address the unsafe condition on these products. DATES: This AD is effective January 4, 2021. The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of January 4, 2021. The FAA must receive comments on this AD by February 1, 2021. ADDRESSES: You may send comments, using the procedures found in 14 CFR 11.43 and 11.45, by any of the following methods: • Federal eRulemaking Portal: Go to https://www.regulations.gov. Follow the instructions for submitting comments. • Fax: (202) 493-2251. • Mail: U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590. • Hand Delivery: Deliver to Mail address above between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. For service information identified in this final rule, contact Rolls-Royce plc, P.O. Box 31, Derby, DE24 8BJ, United Kingdom, phone: +44 (0)1332 242424; website: https://www.rolls-royce.com/​contact-us.aspx. You may view this service information at the FAA, Airworthiness Products Section, Operational Safety Branch, 1200 District Avenue, Burlington, MA 01803. For information on the availability of this material at the FAA, call (781) 238-7759. It is also available at https://www.regulations.gov by searching for and locating Docket No. FAA-2020-1032. Examining the AD Docket You may examine the AD docket at https://www.regulations.gov by searching for and locating Docket No. FAA-2020-1032; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, any comments received, and other information. The street address for the Docket Operations is listed above. FOR FURTHER INFORMATION CONTACT: Scott Stevenson, Aviation Safety Engineer, ECO Branch, FAA, 1200 District Avenue, Burlington, MA 01803; phone: (781) 238-7132; fax: (781) 238-7199; email: …
Fonte: Federal Register (federalregister.gov). Texto original em inglês. Conteúdo sanitizado por segurança.
Documentos e Referências
Monitore DAs automaticamente para sua aeronave
Cadastre sua aeronave no AeroCopilot e receba alertas por e-mail e notificação quando novas diretivas de aeronavegabilidade afetarem seu tipo de aeronave.
Dados obtidos do Federal Register (federalregister.gov). As informações são fornecidas para fins de consulta — consulte sempre a fonte oficial para fins de compliance regulatório.