- AeroCopilot
- /
- Diretivas de Aeronavegabilidade
- /
- 2020-19389
2020-19389
Airworthiness Directives; Dassault Aviation Airplanes
Resumo Rápido
- Número AD
- 2020-19389
- Autoridade
- FAA
- Data de emissão
- 03/09/2020
- Data efetiva
- 08/10/2020
- Criticidade
- routine
Autoridade
Federal Aviation Administration (EUA)
Data de Publicação
03 de setembro de 2020
Data Efetiva
08 de outubro de 2020
Prazo de Cumprimento
Antes do próximo voo
Resumo da Diretiva
A FAA está adotando uma nova diretriz de aeronavegabilidade (AD) para todos os aviões Dassault Aviation Model Falcon 10. Esta AD foi motivada por um relatório de fluido hidráulico no solo próximo à unidade de frenagem do trem de pouso principal (MLG). O vazamento hidráulico teve origem em um tubo hidráulico trincado, com a trinca provavelmente causada por abrasão entre dois tubos hidráulicos ou entre tubos hidráulicos e estrutura. Esta AD exige uma inspeção para detectar abrasão ou interferência de certos tubos hidráulicos e certos furos de passagem de nervura, e, dependendo dos achados, modificação ou reparo, conforme especificado em um Serviço Europeu de Segurança da Aviação (EASA), que está incorporado por referência. A FAA está emitindo esta AD para resolver a condição insegura nesses produtos.
The FAA is adopting a new airworthiness directive (AD) for all Dassault Aviation Model Falcon 10 airplanes. This AD was prompted by a report of hydraulic fluid on the ground near the main landing gear (MLG) brake assembly. The hydraulic leakage started in a cracked hydraulic pipe, with the crack likely due to chafing between two hydraulic pipes or between hydraulic pipes and structure. This AD requires an inspection for chafing or interference of certain hydraulic pipes and certain rib passage holes, and, depending on findings, modification or repair, as specified in a European Union Aviation Safety Agency (EASA), which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.Texto Completo da Diretiva
Expandir texto completo (Federal Register)Texto completo (Federal Register)
Document Headings Document headings vary by document type but may contain the following: • the agency or agencies that issued and signed a document • the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to • the agency docket number / agency internal file number • the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Transportation Federal Aviation Administration • 14 CFR Part 39 • [Docket No. FAA-2020-0448; Product Identifier 2020-NM-050-AD; Amendment 39-21219; AD 2020-17-14] • RIN 2120-AA64 AGENCY: Federal Aviation Administration (FAA), Department of Transportation (DOT). ACTION: Final rule. SUMMARY: The FAA is adopting a new airworthiness directive (AD) for all Dassault Aviation Model Falcon 10 airplanes. This AD was prompted by a report of hydraulic fluid on the ground near the main landing gear (MLG) brake assembly. The hydraulic leakage started in a cracked hydraulic pipe, with the crack likely due to chafing between two ( printed page 54889) hydraulic pipes or between hydraulic pipes and structure. This AD requires an inspection for chafing or interference of certain hydraulic pipes and certain rib passage holes, and, depending on findings, modification or repair, as specified in a European Union Aviation Safety Agency (EASA), which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products. DATES: This AD is effective October 8, 2020. The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of October 8, 2020. ADDRESSES: For material incorporated by reference (IBR) in this AD, contact the EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; telephone +49 221 8999 000; email ADs@easa.europa.eu; internet www.easa.europa.eu. You may find this IBR material on the EASA website at https://ad.easa.europa.eu. You may view this IBR material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195. It is also available in the AD docket on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA-2020-0448. Examining the AD Docket You may examine the AD docket on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA-2020-0448; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, any comments received, and other information. The address for Docket Operations is U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590. FOR FURTHER INFORMATION CONTACT: Tom Rodriguez, Aerospace Engineer, Large Aircraft Section, International Validation Branch, FAA, 2200 South 216th St., Des Moines, WA 98198; telephone and fax 206-231-3226; email tom.rodriguez@faa.gov. SUPPLEMENTARY INFORMATION: Discussion The EASA, which is the Technical Agent for the Member States of the European Union, has issued EASA AD 2020-0072, dated March 26, 2020 (“EASA AD 2020-0072”) (also referred to as the Mandatory Continuing Airworthiness Information, or “the MCAI”), to correct an unsafe condition for all Dassault Aviation Model Falcon 10 airplanes. …
Fonte: Federal Register (federalregister.gov). Texto original em inglês. Conteúdo sanitizado por segurança.
Documentos e Referências
Monitore DAs automaticamente para sua aeronave
Cadastre sua aeronave no AeroCopilot e receba alertas por e-mail e notificação quando novas diretivas de aeronavegabilidade afetarem seu tipo de aeronave.
Dados obtidos do Federal Register (federalregister.gov). As informações são fornecidas para fins de consulta — consulte sempre a fonte oficial para fins de compliance regulatório.