2020-16280

Document Headings Document headings vary by document type but may contain the following: • the agency or agencies that issued and signed a document • the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to • the agency docket number / agency internal file number • the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Transportation Federal Aviation Administration • 14 CFR Part 25 • [Docket No. FAA-2020-0519; Special Conditions No. 25-773-SC] AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final special conditions. SUMMARY: These special conditions are issued for the Bombardier Inc. (Bombardier) Model CL-600-2B19 airplane. This airplane, as modified by Aerospace Design and Compliance, LLC (Aerospace Design and Compliance), will have a novel or unusual design feature when compared to the state of technology envisioned in the airworthiness standards for transport category airplanes. The design feature is an installation of a therapeutic oxygen system for medical use. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards. DATES: Effective August 12, 2020. FOR FURTHER INFORMATION CONTACT: Robert Hettman, Propulsion & Mechanical Systems, AIR-672, Transport Standards Branch, Policy and Innovation Division, Aircraft Certification Service, Federal Aviation Administration, 2200 South 216th Street, Des Moines, Washington 98198; telephone and fax 206-231-3171; email Robert.Hettman@faa.gov. SUPPLEMENTARY INFORMATION: Background On November 20, 2019, Aerospace Design and Compliance applied for a supplemental type certificate for the installation of a therapeutic oxygen system for medical use in the executive interiors of the Bombardier Model CL-600-2B19 airplane. The Model CL-600-2B19 airplane, which is currently approved under Type Certificate No. A21EA, is a twin-engine transport airplane with a maximum takeoff weight of 47,450 lbs. The Model CL-600-2B19 airplane will have 55 seats approved for taxi, takeoff, and landing. Type Certification Basis Under the provisions of title 14, Code of Federal Regulations (14 CFR) 21.101, Aerospace Design and Compliance must show that the Bombardier Model CL-600-2B19 airplane, as changed, continues to meet the applicable provisions of the regulations listed in Type Certificate No. A21EA, or the applicable regulations in effect on the date of application for the change, except for earlier amendments as agreed upon by the FAA. If the Administrator finds that the applicable airworthiness regulations ( e.g.,14 CFR part 25) do not contain adequate or appropriate safety standards for the Bombardier Model CL-600-2B19 airplane because of a novel or unusual design feature, special conditions are prescribed under the provisions of § 21.16. Special conditions are initially applicable to the model for which they are issued. Should the applicant apply for a supplemental type certificate to modify any other model included on the same type certificate to incorporate the same novel or unusual design feature, these special conditions would also apply to the other model under § 21.101. In addition to the applicable airworthiness regulations and special conditions, the Bombardier Model CL-600-2B19 airplane must comply with the fuel-vent and exhaust-emission requirements of 14 CFR part 34, and the noise certification requirements of 14 CFR part 36. The FAA issues special conditions, as defined in 14 CFR 11.19, in accordance with § 11.38, and they become par…

Fonte: Federal Register (federalregister.gov). Texto original em inglês. Conteúdo sanitizado por segurança.