2020-15818

Document Headings Document headings vary by document type but may contain the following: • the agency or agencies that issued and signed a document • the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to • the agency docket number / agency internal file number • the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Transportation Federal Aviation Administration • 14 CFR Part 39 • [Docket No. FAA-2020-0097; Product Identifier 2019-NM-208-AD; Amendment 39-21157; AD 2020-14-03] • RIN 2120-AA64 AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule. SUMMARY: The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 737-300, -400, and -500 series airplanes. This AD was prompted by a report that a crack indication consistent with fatigue cracking was found on the left nacelle support overwing fitting flange fastener hole during teardown of a Model 737-300 series airplane. This AD requires a general visual inspection of the strut to wing diagonal brace at a certain location for cracking. For certain airplanes, this AD also requires an ultrasonic inspection of the nacelle support overwing fitting at certain fastener locations for cracking. For certain other airplanes, this AD requires a magnetic check of the nacelle support overwing fitting at a certain location to determine the material composition. This AD requires applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products. DATES: This AD is effective August 27, 2020. The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of August 27, 2020. ADDRESSES: For service information identified in this final rule, contact Boeing Commercial Airplanes, Attention: Contractual & Data Services (C&DS), 2600 Westminster Blvd., MC 110-SK57, Seal Beach, CA 90740-5600; telephone 562-797-1717; internet https://www.myboeingfleet.com. You may view this service information at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195. It is also available on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA-2020-0097. Examining the AD Docket You may examine the AD docket on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA-2020-0097; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, any comments received, and other information. The address for Docket Operations is U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590. FOR FURTHER INFORMATION CONTACT: Wayne Ha, Aerospace Engineer, Airframe Section, FAA, Los Angeles ACO Branch, 3960 Paramount Boulevard, Lakewood, CA 90712-4137; phone: 562-627-5238; fax: 562-627-5210; email: wayne.ha@faa.gov. SUPPLEMENTARY INFORMATION: Discussion The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to all The Boeing Company Model 737-300, -400, and -500 series airplanes. The NPRM published in the Federal Register on February 18, 2020 (85 FR 8776). The NPRM was prompted by a report that a crack indication consistent with fatigue cracking was found on the left nacelle support overwing fitting flange fastener hole during teard…

Fonte: Federal Register (federalregister.gov). Texto original em inglês. Conteúdo sanitizado por segurança.