2020-13759

Document Headings Document headings vary by document type but may contain the following: • the agency or agencies that issued and signed a document • the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to • the agency docket number / agency internal file number • the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Transportation Federal Aviation Administration • 14 CFR Part 25 • [Docket No. FAA-2019-0840; Special Conditions No. 25-769-SC] AGENCY: Federal Aviation Administration (FAA), Transportation (DOT). ACTION: Final special conditions. SUMMARY: These special conditions are issued for The Boeing Company (Boeing) Model 777-300ER series airplanes. These airplanes will have a novel or unusual design feature when compared to the state of technology envisioned in the airworthiness standards for transport category airplanes. This design feature is single-occupant, oblique seats equipped with pretensioner restraint systems. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards. DATES: Effective August 10, 2020. FOR FURTHER INFORMATION CONTACT: Shannon Lennon, Airframe and Cabin Safety Section, AIR-675, Transport Standards Branch, Policy and Innovation Division, Aircraft Certification Service, Federal Aviation Administration, 2200 South 216th Street, Des Moines, Washington 98198; telephone and fax 206-231-3209; email shannon.lennon@faa.gov. SUPPLEMENTARY INFORMATION: ( printed page 41332) Background On July 18, 2018, Boeing applied for a change to Type Certificate No. T00001SE for single-occupant oblique seats with pretensioner restraint systems, instead of airbags, which are the typical restraints used to protect the passengers from head injuries. These seats are to be installed in Boeing Model 777-300ER series airplanes. The Boeing Model 777-300ER series airplanes are twin-engine, transport-category airplanes with passenger seating capacity of 550 and a maximum takeoff weight of 775,000 pounds. Type Certification Basis Under the provisions of title 14, Code of Federal Regulations (14 CFR) 21.101, Boeing must show that the Model 777-300ER series airplanes, as changed, continue to meet the applicable provisions of the regulations listed in Type Certificate No. T00001SE or the applicable regulations in effect on the date of application for the change, except for earlier amendments as agreed upon by the FAA. If the Administrator finds that the applicable airworthiness regulations ( e.g.,14 CFR part 25) do not contain adequate or appropriate safety standards for Boeing Model 777-300ER series airplanes because of a novel or unusual design feature, special conditions are prescribed under the provisions of § 21.16. Special conditions are initially applicable to the model for which they are issued. Should the type certificate for that model be amended later to include any other model that incorporates the same novel or unusual design feature, or should any other model already included on the same type certificate be modified to incorporate the same novel or unusual design feature, these special conditions would also apply to the other model under § 21.101. In addition to the applicable airworthiness regulations and special conditions, Boeing Model 777-300ER series airplanes must comply with the fuel-vent and exhaust-emission requirements of 14 CFR part 34 and the noise certification requirements of 14 CFR part 36. The FAA issues special cond…

Fonte: Federal Register (federalregister.gov). Texto original em inglês. Conteúdo sanitizado por segurança.