- AeroCopilot
- /
- Diretivas de Aeronavegabilidade
- /
- 2020-07647
2020-07647
Airworthiness Directives; ATR-GIE Avions de Transport Régional Airplanes
Resumo Rápido
- Número AD
- 2020-07647
- Autoridade
- FAA
- Data de emissão
- 13/04/2020
- Data efetiva
- 18/05/2020
- Criticidade
- routine
Autoridade
Federal Aviation Administration (EUA)
Data de Publicação
13 de abril de 2020
Data Efetiva
18 de maio de 2020
Prazo de Cumprimento
Antes do próximo voo
Resumo da Diretiva
A FAA está adotando uma nova diretiva de aeronavegabilidade (AD) para certos aviões ATR-GIE Avions de Transport Régional, modelo ATR42-500. Esta AD foi motivada por um relatório de interferência entre parafusos de correia de aterramento e hastes de comando da aba de passo na linha de montagem final da ATR. Esta AD requer inspeção dos parafusos de correia de aterramento quanto à instalação apropriada, inspeção detalhada de danos nas hastes de comando da aba de passo, se necessário, e substituição das hastes de comando da aba de passo, se necessário, conforme especificado em uma AD da Agência de Segurança de Aviação da União Europeia (EASA), que é incorporada por referência. A FAA está emitindo esta AD para corrigir a condição insegura nestes produtos.
The FAA is adopting a new airworthiness directive (AD) for certain ATR--GIE Avions de Transport R[eacute]gional Model ATR42-500 airplanes. This AD was prompted by a report of interference between bonding braid screws and pitch tab control rods on the ATR final assembly line. This AD requires an inspection of the bonding braid screws for proper installation, a detailed inspection for damage to the pitch tab control rods if necessary, and replacement of the pitch tab control rods if necessary, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.Texto Completo da Diretiva
Expandir texto completo (Federal Register)Texto completo (Federal Register)
Document Headings Document headings vary by document type but may contain the following: • the agency or agencies that issued and signed a document • the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to • the agency docket number / agency internal file number • the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Transportation Federal Aviation Administration • 14 CFR Part 39 • [Docket No. FAA-2019-0985; Product Identifier 2019-NM-183-AD; Amendment 39-19891; AD 2020-07-12] • RIN 2120-AA64 AGENCY: Federal Aviation Administration (FAA), Department of Transportation (DOT). ACTION: Final rule. SUMMARY: The FAA is adopting a new airworthiness directive (AD) for certain ATR—GIE Avions de Transport Régional Model ATR42-500 airplanes. This AD was prompted by a report of interference between bonding braid screws and pitch tab control rods on the ATR final assembly line. This AD requires an inspection of the bonding braid screws for proper installation, a detailed inspection for damage to the pitch tab control rods if necessary, and replacement of the pitch tab control rods if necessary, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products. DATES: This AD is effective May 18, 2020. The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of May 18, 2020. ADDRESSES: For the material incorporated by reference (IBR) in this AD, contact the EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; telephone +49 221 89990 1000; email ADs@easa.europa.eu; internet www.easa.europa.eu. You may find this IBR material on the EASA website at https://ad.easa.europa.eu. You may view this IBR material at the FAA, Transport Standards Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195. It is also available in the AD docket on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA-2019-0985. Examining the AD Docket You may examine the AD docket on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA-2019-0985; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, the regulatory evaluation, any comments received, and other information. The address for Docket Operations is U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590. FOR FURTHER INFORMATION CONTACT: Shahram Daneshmandi, Aerospace Engineer, International Section, Transport Standards Branch, FAA, 2200 South 216th St., Des Moines, WA 98198; telephone and fax 206-231-3220. SUPPLEMENTARY INFORMATION: Discussion The EASA, which is the Technical Agent for the Member States of the European Union, has issued EASA AD 2019-0262, dated October 22, 2019 (“EASA AD 2019-0262”) (also referred to as the Mandatory Continuing Airworthiness Information, or “the MCAI”), to correct an unsafe condition for certain ATR—GIE Avions de Transport Régional Model ATR42-500 airplanes. The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain ATR—GIE Avions de Transport Régional Model ATR42-500 airplanes. The NPRM published in th…
Fonte: Federal Register (federalregister.gov). Texto original em inglês. Conteúdo sanitizado por segurança.
Documentos e Referências
Monitore DAs automaticamente para sua aeronave
Cadastre sua aeronave no AeroCopilot e receba alertas por e-mail e notificação quando novas diretivas de aeronavegabilidade afetarem seu tipo de aeronave.
Dados obtidos do Federal Register (federalregister.gov). As informações são fornecidas para fins de consulta — consulte sempre a fonte oficial para fins de compliance regulatório.