2020-05330

Document Headings Document headings vary by document type but may contain the following: • the agency or agencies that issued and signed a document • the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to • the agency docket number / agency internal file number • the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Transportation Federal Aviation Administration • 14 CFR Part 39 • [Docket No. FAA-2019-0614; Product Identifier 2019-NE-14-AD; Amendment 39-19878; AD 2020-05-28] • RIN 2120-AA64 AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule. SUMMARY: The FAA is superseding Airworthiness Directive (AD) 2019-11-08 for all International Aero Engines, LLC (IAE) PW1133G-JM, PW1133GA-JM, PW1130G-JM, PW1129G-JM, PW1127G-JM, PW1127GA-JM, PW1127G1-JM, PW1124G-JM, PW1124G1-JM, and PW1122G-JM model turbofan engines. AD 2019-11-08 required the removal of the main gearbox (MGB) assembly and electronic engine control (EEC) software and the installation of a part and software version eligible for installation for engines that operate on extended operations (ETOPS) flights. This AD retains the requirements of AD 2019-11-08 and requires replacement of the MGB assembly and EEC software on engines that do not operate on ETOPS flights. This AD was prompted by multiple reports of in-flight engine shutdowns as the result of high-cycle fatigue causing fracture of certain parts of the MGB assembly. The FAA is issuing this AD to address the unsafe condition on these products. DATES: This AD is effective April 21, 2020. ADDRESSES: For service information identified in this final rule, contact International Aero Engines, LLC, 400 Main Street, East Hartford, CT, 06118; phone: 800-565-0140; email: help24@pw.utc.com; internet: http://fleetcare.pw.utc.com. You may view this service information at the FAA, Engine and Propeller Standards Branch, 1200 District Avenue, Burlington, MA, 01803. For information on the availability of this material at the FAA, call 781-238-7759. ( printed page 15055) Examining the AD Docket You may examine the AD docket on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA-2019-0614; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, the regulatory evaluation, any comments received, and other information. The address for Docket Operations is U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590. FOR FURTHER INFORMATION CONTACT: Kevin M. Clark, Aerospace Engineer, ECO Branch, FAA, 1200 District Avenue, Burlington, MA, 01803; phone: 781-238-7088; fax: 781-238-7199; email: kevin.m.clark@faa.gov. SUPPLEMENTARY INFORMATION: Discussion The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 to supersede AD 2019-11-08, Amendment 39-19654 (84 FR 27511, June 13, 2019), (“AD 2019-11-08”). AD 2019-11-08 applied to all IAE PW1133G-JM, PW1133GA-JM, PW1130G-JM, PW1129G-JM, PW1127G-JM, PW1127GA-JM, PW1127G1-JM, PW1124G-JM, PW1124G1-JM, and PW1122G-JM model turbofan engines. AD 2019-11-08 required the removal of the MGB assembly and EEC software and the installation of a part and software version eligible for installation for engines that operate on ETOPS flights. AD 2019-11-08 was prompted by multiple reports of in-flight engine shutdowns as the result of high-cycle fatigue causing fracture of certain parts of the MGB assembly. …

Fonte: Federal Register (federalregister.gov). Texto original em inglês. Conteúdo sanitizado por segurança.