- AeroCopilot
- /
- Diretivas de Aeronavegabilidade
- /
- 2020-03924
2020-03924
Diretivas de Aeronavegabilidade; Bombardier, Inc, Aviões
Resumo Rápido
- Número AD
- 2020-03924
- Autoridade
- FAA
- Data de emissão
- 26/02/2020
- Data efetiva
- 12/03/2020
- Criticidade
- routine
Autoridade
Federal Aviation Administration (EUA)
Data de Publicação
26 de fevereiro de 2020
Data Efetiva
12 de março de 2020
Prazo de Cumprimento
Antes do próximo voo
Resumo da Diretiva
A FAA está adotando uma nova Diretiva de Aeronavegabilidade (AD) para determinados aviões Bombardier, Inc., Modelos BD-700-1A10 e BD-700-1A11. Esta AD foi originada por relatos de que conjuntos de braço de arrasto do trem de pouso principal (MLG) foram encontrados com acabamento de pintura comprometido e corrosão nos diâmetros internos do furo do eixo devido à remoção inadequada de contaminantes durante a fabricação. Esta AD exige uma inspeção única para determinar se um conjunto de braço de arrasto MLG afetado está instalado, inspeções detalhadas repetitivas do diâmetro interno do furo do eixo do conjunto de braço de arrasto MLG afetado em busca de discrepâncias no acabamento de superfície, ações corretivas se necessário, e eventual substituição de primer e tinta e aplicação de composto preventivo de corrosão no diâmetro interno de todos os furos do eixo do conjunto de braço de arrasto MLG afetados, o que encerra as inspeções repetitivas. A FAA está emitindo esta AD para mitigar a condição insegura nestes produtos.
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-1A10 and BD-700-1A11 airplanes. This AD was prompted by reports that main landing gear (MLG) trailing arm assemblies were found with compromised paint finish and corrosion on the axle bore inner diameters due to improper removal of contaminants during manufacturing. This AD requires a one-time inspection to determine if an affected MLG trailing arm assembly is installed, repetitive detailed inspections of the inner diameter of the affected MLG trailing arm assembly axle bore for surface finish discrepancies, corrective actions if necessary, and eventual replacement of primer and paint and application of corrosion preventive compound on the inner diameter of all affected MLG trailing arm assembly axle bores, which terminates the repetitive inspections. The FAA is issuing this AD to address the unsafe condition on these products.Texto Completo da Diretiva
Expandir texto completo (Federal Register)Texto completo (Federal Register)
Document Headings Document headings vary by document type but may contain the following: • the agency or agencies that issued and signed a document • the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to • the agency docket number / agency internal file number • the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions See the Document Drafting Handbook for more details. Department of Transportation Federal Aviation Administration • 14 CFR Part 39 • [Docket No. FAA-2020-0100; Product Identifier 2020-NM-016-AD; Amendment 39-19845; AD 2020-03-21] • RIN 2120-AA64 AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule; request for comments. SUMMARY: The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-1A10 and BD-700-1A11 airplanes. This AD was prompted by reports that main landing gear (MLG) trailing arm assemblies were found with compromised paint finish and corrosion on the axle bore inner diameters due to improper removal of contaminants during manufacturing. This AD requires a one-time inspection to determine if an affected MLG trailing arm assembly is installed, repetitive detailed inspections of the inner diameter of the affected MLG trailing arm assembly axle bore for surface finish discrepancies, corrective actions if necessary, and eventual replacement of primer and paint and application of corrosion preventive compound on the inner diameter of all affected MLG trailing arm assembly axle bores, which terminates the repetitive inspections. The FAA is issuing this AD to address the unsafe condition on these products. DATES: This AD becomes effective March 12, 2020. The Director of the Federal Register approved the incorporation by reference of certain publications listed in this AD as of March 12, 2020. The FAA must receive comments on this AD by April 13, 2020. ADDRESSES: You may send comments, using the procedures found in 14 CFR 11.43 and 11.45, by any of the following methods: • Federal eRulemaking Portal: Go to https://www.regulations.gov. Follow the instructions for submitting comments. • Fax: 202-493-2251. • Mail: U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590. • Hand Delivery: U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC, between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. For service information identified in this final rule, contact Bombardier, Inc., 400 Côte-Vertu Road West, Dorval, Québec H4S 1Y9, Canada; telephone 514-855-5000; fax 514-855-7401; email thd.crj@aero.bombardier.com; internet http://www.bombardier.com. You may view this referenced service information at the FAA, Transport Standards Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195. It is also available on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA-2020-0100. Examining the AD Docket You may examine the AD docket on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA-2020-0100; or in person at the Docket Operations office between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this AD, the regulatory evaluation, any comments received, and other information. T…
Fonte: Federal Register (federalregister.gov). Texto original em inglês. Conteúdo sanitizado por segurança.
Documentos e Referências
Monitore DAs automaticamente para sua aeronave
Cadastre sua aeronave no AeroCopilot e receba alertas por e-mail e notificação quando novas diretivas de aeronavegabilidade afetarem seu tipo de aeronave.
Dados obtidos do Federal Register (federalregister.gov). As informações são fornecidas para fins de consulta — consulte sempre a fonte oficial para fins de compliance regulatório.